The AUSubaru.com.au Forums

I did a search, but only came up with MY stuff.

Before I finish shortening the shifter linkages to go in the RX (with Liberty dual range box) and decided to tighten up the bushes while Im at it.

For those that have done it, where did you get the bushes? I was thinking of dropping into the local auto parts store and have a rattle through his box of rubber bushes to find some matches.

If I succeed, I'll post up my results.

They are still available from Subaru. I'm 99% sure they use the same as the Impreza but Andy (frog) should be able to help out here?

RSR 555 wrote:Andy (frog) should be able to help out here?

He would certainly be my first port of call for something like this!

Cheers

Bennie

Genuine coz they are pairs of bushes inside bushes

633011330 bush g/s lvr is one part number of three ?
search and should find a pic in here



Uploaded with ImageShack.us

Andy has got me part numbers for the bushes.

Ignore the shortening of my linkages


Join 1 has 2 x 633124170 and 2 x 633124180

Join 2 has the same as above

Join 3 has 2 x 633011330

Join 4 has 2 x 33146ga210

Here they are dismantled

Those steel spacer tubes !, I either need a pair or their specs, Gannon can you supply me their specs please?

tripping up on those deck nails yet ?

Good thing this was bumped up, I got the bushes in the mail today. BIG thanks to Frog for getting me the parts.

I'll install the bushes tomorrow and take more pictures. I'll also get the calipers out and measure those tubes for you Jon

The deck nails are on my to-do list, I ripped a sock on one the other day

BUMP - those measures will be appreciated , anyone got spares kicking around?

Ok, the tube is 36mm long, 11mm outside diameter and 8mm inside diameter

I have another linkage kicking around somewhere, if I have spare tubes, would you like them?

Shortened, welded and painted, plus the new bushes.



All ready to bolt in next weekend.