Page 1 of 1
timing belt kit for 93 rs turbo
Posted: Mon Sep 30, 2013 12:59 pm
by gazcull
please help i need a new timing belt and the idlers for my 93 rs turbo motor , it was a jap import and the only numbers i can find are the ej2o , have checked all over on the internet and it doesn't seem to be listed anywhere, im pretty sure the belt has 281 teeth and is 30mm wide , that's the only information i seem to be able to dig up, please help really wanna get this sorted, cheers
Posted: Mon Sep 30, 2013 4:03 pm
by TOONGA
I have found kits on ebay but none for a motor of that age.
Subaru cannot help with part numbers?
TOONGA
Posted: Mon Sep 30, 2013 4:53 pm
by jayrod
Same as a early WRX ej20 fyi
Posted: Mon Sep 30, 2013 6:11 pm
by TOONGA
jayrod wrote:Same as a early WRX ej20 fyi
Yes it would be, but finding a timing belt kit for a turbo 1993 EJ20 motor is the problem.
you got the part numbers for the early WRX kit Jarod? if so share them please.
TOONGA
Posted: Mon Sep 30, 2013 9:15 pm
by jayrod
For my timing belt Stuff i went Odins in Balcatta and got it from there.
Dont think i got the part numbers anywhere.
Posted: Mon Sep 30, 2013 9:44 pm
by RSR 555
If it's still the original EJ20 engine then it will be the same as the early WRX kit. Both RS and early WRX use the EJ20G engine. If the engine has been changed at any point then you'll need to look at the Timing Belt Tensioner. If it has 2x bolts holding a long skinner tensioner then it will be the early one. If the tensioner is help in by 1x bolt (and looks like it pivots off that bolt) then it will be the later model.
Early model kit...
http://www.ebay.com.au/itm/NEW-OEM-Suba ... 2c6add3318
Later model kit...
http://www.ebay.com.au/itm/Subaru-WRX-N ... 3cb318264b
Posted: Tue Oct 01, 2013 1:53 am
by jayrod
First one looks exactly like the kit i bought.
Posted: Wed Oct 02, 2013 12:16 am
by gazcull
cool thanks for that , im gonna take the covers off this weekend and check the tensioner just to be mega sure, once again thanks:D