Page 1 of 1
Car won't move after auto trans service
Posted: Fri Mar 20, 2015 3:33 pm
by Vortex75
Hey, done a service on my auto in my 89 Vortex, after putting the new filter, gasket back in and new fluid (the manual says 3 litres) it won't engage in any of the gears. When I emptied the fluid it seemed there was more than 3 litres there. Do I need to put more fluid in it?
Canny
Posted: Fri Mar 20, 2015 6:16 pm
by pitscars007
Check the fluid level with the dipstick with the motor running in park - and the car on level ground.
Posted: Fri Mar 20, 2015 6:31 pm
by TOONGA
8.5-9 litres for the automatic transmission.
the torque converter will take up to 3 litres on its own.
the differential is a seperate section and takes 3 to 4 litres of diff oil. (not transmission oil)
do you have the FSM which has been uploaded in these links?
downloads.php?do=file&id=122
downloads.php?do=file&id=123
downloads.php?do=file&id=124
downloads.php?do=file&id=125
good luck with it
TOONGA
Posted: Fri Mar 20, 2015 8:56 pm
by Vortex75
Thanks mate, just added the rest ands it fine. Don't know anything about those links. Thanks again.