EJ22 Grinding noise

Get the most out of your Engine / Gearbox with these handy hints ...
User avatar
Subydoug
Junior Member
Posts: 988
Joined: Wed Feb 08, 2012 10:19 pm
Location: Carlisle WA

Post by Subydoug » Mon Mar 21, 2016 8:27 pm

Thats good news mate. Could still be Gearbox though. And your sure its coming from the front of the car, not the back? Or still unsure?

Doug

User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Tue Mar 22, 2016 7:30 am

gearbox was swapped out Dougy.

this bastard noise would be testing my patience right about this point :(

good guesser Wayne !! I love the 100,000km warranty

User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Tue Mar 22, 2016 7:34 am

home dyno up on stands might disclose something ??

User avatar
Kalbarri_baru
Junior Member
Posts: 230
Joined: Sun Mar 29, 2009 9:47 am
Location: Kalbarri W.A
Contact:

Post by Kalbarri_baru » Tue Mar 22, 2016 3:16 pm

Subydoug wrote:Thats good news mate. Could still be Gearbox though. And your sure its coming from the front of the car, not the back? Or still unsure?

Doug
Heya Doug, funny you mention that as I discussed with the mechanic up here today that we may want to visit the rear brakes sometime this week, mind you my bank balance is just about shot.

would you know if the tin guards behind the disks and around the caliper area can be removed for good without affecting the performance of the car ??.

Cheers

WayneO.............
[SIGPIC][/SIGPIC]

User avatar
Kalbarri_baru
Junior Member
Posts: 230
Joined: Sun Mar 29, 2009 9:47 am
Location: Kalbarri W.A
Contact:

Post by Kalbarri_baru » Tue Mar 22, 2016 3:18 pm

steptoe wrote:home dyno up on stands might disclose something ??
Heya Bloke, we tried that last week when we had the L on the hoist and ran it with high revs in First, Second and Third gear and nothing showed up with that test.

Cheers

WayneO............
[SIGPIC][/SIGPIC]

User avatar
AndrewT
Senior Member
Posts: 4777
Joined: Tue Oct 04, 2005 10:00 am
Location: WA
Contact:

Post by AndrewT » Tue Mar 22, 2016 4:56 pm

There is a thin metal cover at the bottom of the bellhousing to close the gap between the bellhousing and engine, and also provides a good inspection gap to see the flywheel. Sometimes this can get bent up very slightly, just enough to rub against the flywheel ringgear and make grinding noises.

User avatar
Subydoug
Junior Member
Posts: 988
Joined: Wed Feb 08, 2012 10:19 pm
Location: Carlisle WA

Post by Subydoug » Tue Mar 22, 2016 7:48 pm

Whoops, missed that Jonno, My brain is made of playdoh ;).
Kalbarri_baru wrote:would you know if the tin guards behind the disks and around the caliper area can be removed for good without affecting the performance of the car ??.

Cheers

WayneO............
I have no idea WayneO, might be a question best addressed to Paul.

No noise when spinning on the Hoist...maybe because its not under load. Maybe the rear Diff?? got oil in it? You can pop the rear CV shafts out and it will eliminate the tailshaft, diff and bits that the tailshaft is connected to before the 4wd engagement thingymabob.

Regards

Doug

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Wed Mar 23, 2016 2:24 pm

Not sure if anyone has mentioned the centre bearing yet Wayno.

If the tailshaft unis are good then it is more than likely there is nothing wrong with the centre bearing.

Can you video the noise in the car with the windows closed? or is it more an outside noise?

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Wed Apr 20, 2016 8:15 am

Any updates on this WayneO or are you too busy fishing??

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

Post Reply

Return to “Engine, Gearbox and Diff”