will an EJ18 ecu run an EJ22
Posted: Tue Nov 28, 2006 3:22 pm
If I wanted to upgrade my EJ18 to a EJ22 would I be able to use my current 2-plug ECU and loom, or would I need to get a new ecu / loom ?
The AUSubaru.com.au Forums
One of Australia's original and top performing Subaru sites. Come and have a look and find out why so many people enjoy this site.***ONLINE SINCE SEPTEMBER 2018*** site address: www.ausubaru.com.au
https://ausubaru.com.au/
will an EJ18 ecu run an EJ22
Page 1 of 1
Posted: Tue Nov 28, 2006 4:55 pm
not enough power paul?? i would asume the 22 would have more sensors????
Posted: Tue Nov 28, 2006 6:27 pm
might be possible if you run the EJ18 manifold / sensors but i would assume the tune would be all wrong.
I havnt been in your car with the 18, but the 22's pull hard in an MY
Do it
I havnt been in your car with the 18, but the 22's pull hard in an MY
Do it
Posted: Tue Nov 28, 2006 7:15 pm
Yeah the 18 is all well and good, I like it heaps but really wouldn't mind the extra from a 22.
Posted: Wed Nov 29, 2006 9:05 pm
Not recommended. That goes for 20-22, 22-25 also. Of course the engine will run but the timing maps especially are all wrong.
EJ22 loom and ecu's are cheap and common, do it right and make the most of the engine swap. A complete Ej18 conversion shouldn't be hard to sell either.
EJ22 loom and ecu's are cheap and common, do it right and make the most of the engine swap. A complete Ej18 conversion shouldn't be hard to sell either.