Page 1 of 1
L 4WD auto stub splines same as manual?
Posted: Mon Dec 11, 2006 10:34 pm
by steptoe
Just wondering if anyone knows the splines on GLAT (L series turbo auto) tranny front stub axles are the same number as that on a standard 5 speed 4WD manual box or are they bigger and more splines as on the turbo manuals ??
* what is behind the wondering is - am I gonna need to change the cv shafts to swap from auto to manual
Posted: Tue Dec 12, 2006 6:06 pm
by stamp_licker
the auto's n/a and turbo are the smaller spline[23 spline]. A turbo manual L or ej box[both 25 splines] won't fit onto these but if n/a L manual box is 23 spline it will.Also its the same spline as whats on the back diff on a L..
Posted: Wed Dec 13, 2006 10:51 am
by AndrewT
You won't need to change the whole shaft anyway, just the inner CV cup. Quite easy to do, just messy!
Posted: Mon Dec 18, 2006 8:31 pm
by steptoe
good to know, thanks.
messy - you are not wrong there, and you gotta be careful not to drop your balls too !
Posted: Mon Dec 18, 2006 9:20 pm
by Suby Wan Kenobi
Nothing worse than dropping your balls and getting dirt in them.
Posted: Tue Dec 19, 2006 1:17 pm
by daza
I hear getting Tooth Paste on them is much, much worse...
Daza.
Posted: Tue Dec 19, 2006 2:40 pm
by vincentvega
hahahahahaha toothpaste
