Page 1 of 1
where to weld diff?
Posted: Fri Feb 02, 2007 9:54 pm
by vidler
okay, so, i got the welder, i got the ability, ive had welded diffs before but never opened one up to look inside, now i want to weld up a couple more. One for the brumby, and one for subi...
so does anyone have a photo or detailed description of where i have to weld? and can it be done by just removing the cover or do i have to dismantle the whole centre?
Posted: Fri Feb 02, 2007 9:59 pm
by D3V1L
spider gears in the miuddle....cant miss
dave
Posted: Sat Feb 03, 2007 12:22 am
by tim_81coupe
Clean the spider gears well first. I'd recommend first removing the centre so you can work on it on a bench. Then clean the spider gears with spirits or petrol to get rid of any traces of diff oil. Once that's evaporated then weld up the spider gears and make sure the ring gear doesn't cop any spatter.
Posted: Sat Feb 03, 2007 6:27 am
by vidler
which ones are the spider gears? is that the one which either has the 37 or 39 teeth? or the ones that mesh onto that?
Posted: Sat Feb 03, 2007 10:48 am
by Subafury
Posted: Sat Feb 03, 2007 11:09 am
by stinky
When Brett did mine we stuck it in a vice cover up, pulled the cover off. welded it with the oil in there. tipped out the oil and filled it back up.
Posted: Sat Feb 03, 2007 8:01 pm
by waggaclint
Posted: Sun Feb 04, 2007 12:17 pm
by vidler
sweet. picture helped me out good. should be smooth sailing from here now:)
Posted: Sun Feb 04, 2007 10:39 pm
by Subafury
what's the date we get locked up?
Posted: Sun Feb 04, 2007 11:06 pm
by vidler
ill be working on em during the week. i have a spare 3.7 diff here so ill weld that one up, then it will be a case of you coming over, then straight swap. ill give ya hand removing/installing and should take all of a couple of hours, just bring some diff oil. ill aim for saturday at the moment. will keep you posted
Posted: Wed Feb 07, 2007 11:53 am
by fredsub
vidler wrote:which ones are the spider gears? is that the one which either has the 37 or 39 teeth? or the ones that mesh onto that?
so that main gear you count 37 teeth and its a 3.7....damn:(
Posted: Thu Feb 08, 2007 6:30 am
by vidler
lol. yep:) brumby is now locked up and ready to go.... test drive drive on road today. If anything is gonna break it will do it onroad first because of the stress. ill post some pics when i weld the 2nd one so everone else understands where to weld
Posted: Thu Feb 08, 2007 10:24 pm
by vidler
its actually written on the gears.... i saw 37:10 imprinted on the large gear:)
