Page 1 of 1
gear box dismantle?
Posted: Fri Jun 29, 2007 6:38 am
by Captain Obvious
im pulling apart a L series dual range but im suck on how to get the rear part of the case off? there seems to be the gear linkage in getting caught? any ideas or tricks?
cheers bryan
Posted: Fri Jun 29, 2007 11:55 am
by vincentvega
theres a big thread on dismantling on the rlsc forum
Posted: Fri Jun 29, 2007 7:41 pm
by Outback bloke
Brian, you have to undo the 10mm bolt head on the reverse gear switch arm.
Posted: Fri Jun 29, 2007 9:37 pm
by Captain Obvious
can you see that from the top were you take the 4X4 cover plate off??
Posted: Sat Jun 30, 2007 7:01 am
by Outback bloke
Yes, it is down on the left hand side. Shine a torch in there and you will see it.
Posted: Sat Jun 30, 2007 6:37 pm
by Captain Obvious
got it! but had to work out how to get all the 4x4 linkage stuff on top out of the way, very interesting inside, think im ready to pull the lib one apart now!!