Page 1 of 1
Dual Port Head Rockers
Posted: Sat Jul 21, 2007 7:29 pm
by Matt
Are Dual Port Head Rockers different? As the push rod on number 3-4 (piston) ton the exhaust side don't line up. Ie the push rod hits the head?
Thanks
Matty
Posted: Sat Jul 21, 2007 11:10 pm
by Gannon
Shouldnt be
Dual port heads arent much different to the normal ones, only that there is a divider in the exhaust port
Posted: Sun Jul 22, 2007 9:45 am
by Matt
The intake is different too, much better flow. I post up pics later but you can easily see the valves through where the intake mainfold bolts up.
Posted: Sun Jul 22, 2007 2:46 pm
by Phizinza
Suparoo wrote:Shouldnt be
Dual port heads arent much different to the normal ones, only that there is a divider in the exhaust port
The Valves are swaped to standard EA81... They are the same arrangement to the EA82.
Sorry matt, never compared mine with standard..
Posted: Sun Jul 22, 2007 3:25 pm
by discopotato03
Pics pretty please of the chambers and into both inlet and exhaust ports .
Cheers A .
Posted: Sun Jul 22, 2007 3:59 pm
by Matt
Will post up pics later tonite, if i get a chance.
Thanks for the replies.
Posted: Sun Jul 22, 2007 5:13 pm
by Gannon
Phizinza wrote:The Valves are swaped to standard EA81... They are the same arrangement to the EA82.
Sorry matt, never compared mine with standard..
In that case i withdraw my previous statement.
We learn something every day:D