Looking for 4.11 or 4.44

[soobme]

Iv'e been told that I can find all the info I need here.
I am trying to find out if there is a way to get 4.11 or 4.44 gears into a 5spd Dual range EA82 gear box.

[soobme]

PS: I'm not a newbi, just new here. (I come from the USMB) And I was told over @ the USMB that this was the place to get info on lower R&P sets for the EA82 5spd D/R.

[legacytt]

Not an option for EA 82 box unless you build up a Liberty(Legacy) dual range in the L series case. You can then use the 4.11 or 4.44 R & P with the gearset from the 3.9 dual range box. You will need the viscouse centre diff so a shorter tailshaft and modded gearbox mt. Basically a complete rebuild with all gears swapped over.

[soobme]

So all the internals are interchangable?!? I didn't know that So this would give me a D/R 5spd gear box with 4.44 R&P?
U would think that SOME ONE would have made some aftermarket R&P sets for the EA82 box by now

[legacytt]

Not avilable aftermarket but you can buy the R & P from Subaru for a minor ransom. A member of the old crashed board is in the process of building one.