Page 1 of 1
Looking for 4.11 or 4.44
Posted: Fri Oct 07, 2005 8:01 pm
by soobme
Iv'e been told that I can find all the info I need here.
I am trying to find out if there is a way to get 4.11 or 4.44 gears into a 5spd Dual range EA82 gear box.
Posted: Sat Oct 08, 2005 11:03 am
by soobme
PS: I'm not a newbi, just new here. (I come from the USMB) And I was told over @ the USMB that this was the place to get info on lower R&P sets for the EA82 5spd D/R.
4.11 Box
Posted: Sat Oct 08, 2005 7:58 pm
by legacytt
Not an option for EA 82 box unless you build up a Liberty(Legacy) dual range in the L series case. You can then use the 4.11 or 4.44 R & P with the gearset from the 3.9 dual range box. You will need the viscouse centre diff so a shorter tailshaft and modded gearbox mt. Basically a complete rebuild with all gears swapped over.
Posted: Fri Oct 14, 2005 4:05 am
by soobme
So all the internals are interchangable?!? I didn't know that
So this would give me a D/R 5spd gear box with 4.44 R&P?
U would think that SOME ONE would have made some aftermarket R&P sets for the EA82 box by now
Gearbox
Posted: Fri Oct 14, 2005 7:22 pm
by legacytt
Not avilable aftermarket but you can buy the R & P from Subaru for a minor ransom. A member of the old crashed board is in the process of building one.