Brumby Diff Mount

rossandhazel16 · Post by **rossandhazel16** » Thu Jan 17, 2008 11:04 am

My Brumby diff mount has flogged out. Is there any other mounts available instead of the genuine?

Suba · Post by **Suba** » Thu Jan 17, 2008 11:40 am

Hi Ross ?

try the search feature on the top of the main page , I am pretty sure that there was something available for what you are after , just cant remember who it was , see how you go

Mike.

Suby Wan Kenobi · Post by **Suby Wan Kenobi** » Thu Jan 17, 2008 1:55 pm

Justins ones are still a little way off but Boxxer motors over here in Qld sell some aftermarket Urethane ones for $40 for the setup

Post by **yarney** » Thu Jan 17, 2008 4:15 pm

Its called Boxer service phone 07 32054495 i think they will post items

Jan

Xtreme_RX · Post by **Xtreme_RX** » Thu Jan 17, 2008 4:20 pm

Be warned the ones from Boxer motors are very hard - they have no reliefs cut in to them & can cause uni-joint & diff hanger failure.......

steptoe · Post by **steptoe** » Thu Jan 17, 2008 9:49 pm

Second hand ,later model L series may be in better condition as in not so old - they all fit. I have done so.

Suby Wan Kenobi · Post by **Suby Wan Kenobi** » Thu Jan 17, 2008 10:40 pm

Trying to find one from an L series that isnt flogged out can turn into a real run around anyway.

rossandhazel16 · Post by **rossandhazel16** » Sun Jan 27, 2008 10:10 am

I have tried to open the Blackbox Motorsports site and no go. Sent an email which bounced. Are they still operating?

http://www.blackboxmotorsports.com/Blackbox