Page 1 of 1
Power Window Wiring
Posted: Sun Oct 22, 2006 6:42 pm
by Matt
Do the power windows use reverse polarity or just + 12v applied to the other side of the motor input? ( the three wire input motors on MY)
i.e
Wind up
Input 1 +12
Input 2 Earth (0V)
Input 3 Nothing
Wind Down
Input 1 Nothing
Input 2 Earth (0V)
Input 3 +12
Cheers
Matt
Posted: Wed Oct 25, 2006 7:43 pm
by Matt
Bump anyone?
Posted: Sat May 18, 2013 10:17 pm
by Smokey
Just in case 7 years on you are still looking for the answer, for L series at least 12V is applied to one side on the upwind and swapped to the other terminal on the down. Ie 2 wire.
Posted: Sun May 19, 2013 1:43 pm
by Bantum
The switching does all the reversing, as there are only two wires to motor ...
See here :
More Details...
Cheers, Bantum ...
Posted: Wed May 22, 2013 11:25 pm
by El_Freddo
Bantum wrote:The switching does all the reversing, as there are only two wires to motor ...
Yep. Third wire is for the lock out switch - cuts the earth wire I think from memory - it's been a while!
Cheers
Bennie