EA82T wiring diamgram needed

wrx_nut · Post by **wrx_nut** » Wed Dec 28, 2005 7:09 pm

wiring diagram for EA82t conversion into carby L-series...

any one have one or can give me usefull info on it?

thanks

wrx_nut

steve_rising_sun · Post by **steve_rising_sun** » Fri Dec 30, 2005 5:48 pm

I will send it up as well
Steve

wrx_nut · Post by **wrx_nut** » Fri Dec 30, 2005 9:13 pm

no worries steve

thanks

you have a PM

BlackMale · Post by **BlackMale** » Tue Jan 03, 2006 3:47 pm

Steve,

Could not send 1 this way as well could you?
PLEASE.

steve_rising_sun · Post by **steve_rising_sun** » Tue Jan 03, 2006 6:08 pm

Yup, will be a little while.
Steve

BlackMale · Post by **BlackMale** » Tue Jan 03, 2006 6:22 pm

Thanks Steve. Just let me know when u want my details, you can email, snail mail or fax.

romeo_charlie337 · Post by **romeo_charlie337** » Sun Jan 29, 2006 6:47 pm

I am trying to get my hands on an EA82-t engine wiring diagram. If anyone out there can help me with this problem please email me at [email protected] or leave message here.
Thanks Guys

smoov · Post by **smoov** » Sun Jan 29, 2006 7:10 pm

romeo_charlie337 wrote:I am trying to get my hands on an EA82-t engine wiring diagram. If anyone out there can help me with this problem please email me at [email protected] or leave message here.
Thanks Guys

please decrease your font size. your post is irritating, to say the least.

nik · Post by **nik** » Sun Feb 12, 2006 6:34 pm

Hi Steve, doing the conversion as well, and also interested in wiring diagram and helpfull hints if possible. A lot of stuff is disconnected in the donor (running) RX, which is a little disturbing. Will send PM.

Chris_Rogers · Post by **Chris_Rogers** » Sun Feb 12, 2006 8:01 pm

as a tip. when you do the swap - swap the fuel lines as well. you will end up with a flooding problem if you do not as fuel goes to the charcoal canister.

also upgrade the wirig to the pump as well. injected version has 14awg where the carb one has 16-18awg.

Gannon · Post by **Gannon** » Mon Feb 13, 2006 4:59 pm

Wow, Looks like there are lots of ea82t conversions going on (me included)

Im Putting a 88Vortex turbo motor and ecu in my 89 Touring Wagon
But using the touring wagon loom (have you compared a vortex loom to an L series

)

Im also in the lookout for wiring help, does the mpfi loom plug straight into the turbo ecu (except for the obvoius turbo sensors)

Cheers

steve_rising_sun · Post by **steve_rising_sun** » Mon Feb 13, 2006 6:59 pm

Sorry guy I have not done it yet. To pull apart this book and copy is a magor job. I will get there.
Steve

The AUSubaru.com.au Forums

EA82T wiring diamgram needed

EA82T wiring diamgram needed

EA82-t Wiring diagram needed

Re: EA82-t Wiring diagram needed