Page 1 of 1
EA82T wiring diamgram needed
Posted: Wed Dec 28, 2005 7:09 pm
by wrx_nut
wiring diagram for EA82t conversion into carby L-series...
any one have one or can give me usefull info on it?
thanks
wrx_nut
Posted: Fri Dec 30, 2005 5:48 pm
by steve_rising_sun
I will send it up as well
Steve
Posted: Fri Dec 30, 2005 9:13 pm
by wrx_nut
no worries steve
thanks
you have a PM
Posted: Tue Jan 03, 2006 3:47 pm
by BlackMale
Steve,
Could not send 1 this way as well could you?
PLEASE.
Posted: Tue Jan 03, 2006 6:08 pm
by steve_rising_sun
Yup, will be a little while.
Steve
Posted: Tue Jan 03, 2006 6:22 pm
by BlackMale
Thanks Steve. Just let me know when u want my details, you can email, snail mail or fax.
EA82-t Wiring diagram needed
Posted: Sun Jan 29, 2006 6:47 pm
by romeo_charlie337
I am trying to get my hands on an EA82-t engine wiring diagram. If anyone out there can help me with this problem please email me at [email protected] or leave message here.
Thanks Guys
Re: EA82-t Wiring diagram needed
Posted: Sun Jan 29, 2006 7:10 pm
by smoov
romeo_charlie337 wrote:I am trying to get my hands on an EA82-t engine wiring diagram. If anyone out there can help me with this problem please email me at [email protected] or leave message here.
Thanks Guys
please decrease your font size. your post is irritating, to say the least.
Posted: Sun Feb 12, 2006 6:34 pm
by nik
Hi Steve, doing the conversion as well, and also interested in wiring diagram and helpfull hints if possible. A lot of stuff is disconnected in the donor (running) RX, which is a little disturbing. Will send PM.
Posted: Sun Feb 12, 2006 8:01 pm
by Chris_Rogers
as a tip. when you do the swap - swap the fuel lines as well. you will end up with a flooding problem if you do not as fuel goes to the charcoal canister.
also upgrade the wirig to the pump as well. injected version has 14awg where the carb one has 16-18awg.
Posted: Mon Feb 13, 2006 4:59 pm
by Gannon
Wow, Looks like there are lots of ea82t conversions going on (me included)
Im Putting a 88Vortex turbo motor and ecu in my 89 Touring Wagon
But using the touring wagon loom (have you compared a vortex loom to an L series
)
Im also in the lookout for wiring help, does the mpfi loom plug straight into the turbo ecu (except for the obvoius turbo sensors)
Cheers
Posted: Mon Feb 13, 2006 6:59 pm
by steve_rising_sun
Sorry guy I have not done it yet. To pull apart this book and copy is a magor job. I will get there.
Steve