winch me

rubysue · Post by **rubysue** » Sat Apr 11, 2009 10:00 pm

hey does anyone know of a l series that has had a winch fitted, and if so was it a custom bull bar or does someone make one that fits ,

any help would be great

Ben · Post by **Ben** » Sun Apr 12, 2009 10:19 am

Warn do a winch caddie that is for mounting to non winch vehicles, or for use with alloy bullbars. About $300 I think. You'll need chassis rail extensions to mount it to. You won't find off the shelf winch bars for an L series. If you really want one though just go through a 4wd mag and find someone that does tube bars and get one custom made. Probably cost as much as an L series though!

Xtreme_RX · Post by **Xtreme_RX** » Mon Apr 13, 2009 9:04 am

Ben wrote: You won't find off the shelf winch bars for an L series.

Cough cough.... About 3 months away & i will have some.....

tex · Post by **tex** » Wed Apr 15, 2009 10:15 pm

Ben wrote:Warn do a winch caddie that is for mounting to non winch vehicles, or for use with alloy bullbars. About $300 I think. You'll need chassis rail extensions to mount it to. You won't find off the shelf winch bars for an L series. If you really want one though just go through a 4wd mag and find someone that does tube bars and get one custom made. Probably cost as much as an L series though!

When I was in the states found out they were optional equipment over there but then again so were turbos on the brumby!

Matt · Post by **Matt** » Thu Apr 16, 2009 10:35 pm

And i have seen what i believe to be factory mounted winch on a brumby nudge (i don't what would break first the nudge bar or the winch)