Modding an N/A - the truth
Posted: Mon Dec 08, 2008 7:57 pm
I found this over on Oz liberty and thought id share.
All these power mods you people are doing, are cool but useless..
Direct piping, intakes, filters, mufflers etc, will not make any noticeable difference to a N/A AT ALL!
Im not being a dik, im being honest, your wasting your time..
the only way you will ever get more power from an N/A is to do internal engine work, which will be more expensive then just putting a turbo kit on..
If you want any power difference there are some things that need to be addressed which are the basics to more performance.
1st - Why isnt there anyone here with an N/A that has played around with different types of cams?, a good cam set will get you more intake and exhaust which = more power!! pod filters = 0.000001kw power!
2nd - Why dont you people continue with the group buy and get some extractors!! extractors = atleast 3-5 KW's if not more!! CAI = 0.00001KW
3rd - Why not do some cheap headwork?? for about $400 you can get your heads ported, polished and shaved 40thou to increase compression and flow! this = atleast 5-10kws at a minimum!
4th - Port match your heads to your exhaust! this will increase the flow without restriction!! = atleast 2kw's.
5th - Valve springs, harder valve springs ensure no leak from the cylinders and more even fuel combustion, along with a good set of cams this = another 2kw's if not more + better driveability and torque.
6th - all you Auto's, go install a shift kit in the gearbox, $400-500, will give you firm and hard shifts from each gear without that dreaded wait time from gear to gear!
7th - look at larger throttle bodies with other subi's that give you more flow! there is more power gained here and cheap!
8th - Diff ratios, this is one of the most important, a good high revving set can awaken your car like you wouldnt believe
Im only doing this thread as a reference point for you N/A people, too many people are posting questions about things that cost a fortune with NO or little power difference.
All these power mods you people are doing, are cool but useless..
Direct piping, intakes, filters, mufflers etc, will not make any noticeable difference to a N/A AT ALL!
Im not being a dik, im being honest, your wasting your time..
the only way you will ever get more power from an N/A is to do internal engine work, which will be more expensive then just putting a turbo kit on..
If you want any power difference there are some things that need to be addressed which are the basics to more performance.
1st - Why isnt there anyone here with an N/A that has played around with different types of cams?, a good cam set will get you more intake and exhaust which = more power!! pod filters = 0.000001kw power!
2nd - Why dont you people continue with the group buy and get some extractors!! extractors = atleast 3-5 KW's if not more!! CAI = 0.00001KW
3rd - Why not do some cheap headwork?? for about $400 you can get your heads ported, polished and shaved 40thou to increase compression and flow! this = atleast 5-10kws at a minimum!
4th - Port match your heads to your exhaust! this will increase the flow without restriction!! = atleast 2kw's.
5th - Valve springs, harder valve springs ensure no leak from the cylinders and more even fuel combustion, along with a good set of cams this = another 2kw's if not more + better driveability and torque.
6th - all you Auto's, go install a shift kit in the gearbox, $400-500, will give you firm and hard shifts from each gear without that dreaded wait time from gear to gear!
7th - look at larger throttle bodies with other subi's that give you more flow! there is more power gained here and cheap!
8th - Diff ratios, this is one of the most important, a good high revving set can awaken your car like you wouldnt believe
Im only doing this thread as a reference point for you N/A people, too many people are posting questions about things that cost a fortune with NO or little power difference.