Page 1 of 1
ea82t conversion
Posted: Sun Jan 29, 2006 3:02 pm
by wrx_nut
any one got any pics of an ea82t conversion into an L?
Posted: Sun Jan 29, 2006 4:44 pm
by Gannon
are you after pics of just the turbo engine bay or pics of the conversion in progress?
im sure somebody has pics of the conversion progress, but if you are just looking for engine bay pics, try google images
Gannon.
Posted: Sun Jan 29, 2006 5:51 pm
by wrx_nut
conversion pics...ive got the engine sittin in me shed waiting to go in when i get some time to do so... and a lift kit
Posted: Mon Jan 30, 2006 1:50 pm
by BlackMale
If i can 1 of the crew over here with a digi cam to take a pick of mine I'll get them to post it on here for you.
Posted: Mon Jan 30, 2006 4:25 pm
by wrx_nut
no worries... all im really unsure of it the wiring... what i need to take out of my car and what to put in...and where it all goes...?
Posted: Mon Jan 30, 2006 6:08 pm
by steve_rising_sun
I will post some pics in a day or two
Steve
Posted: Mon Jan 30, 2006 7:52 pm
by wrx_nut
cheers steve
that fuel tank coming to ?
Posted: Wed Feb 01, 2006 7:16 pm
by stamp_licker
i stripped a loom down a couple of weeks ago out of turbo sedan to just a motor loom it wasn't to hard at all just lay it out on the ground from engine sensors to ecu remove tape and follow the wires back to the ecu thers a small amount of wires that go from ecu to dash which you splice into your existing loom.took me a year to build up the courage to do it.jump in don't be afraid
Posted: Wed Feb 01, 2006 8:18 pm
by wrx_nut
any pics?
Posted: Thu Feb 02, 2006 11:28 pm
by rsrlegacy
Easiest way is to gut your engine bay loom out of the car. Fit the RX loom straight in. Connects up to RX dash loom and all you have to do is splice in the wires beside the drivers seat that go to the fuel pump and t/lights etc.
Posted: Fri Feb 03, 2006 5:24 pm
by wrx_nut
gut all the wiring under the dash including fusebox?
Posted: Thu Mar 23, 2006 7:39 pm
by wrx_nut
motor is out...turbo crossmember is in with lift blocks...lifting the rest of the car tomorrow....then the EFI fuel tank goes in and the rear gets lifted...after that the ea82t goes in
its getting there
ill keep you posted and take progress pictures of the conversion
wrx_nut
Posted: Fri Mar 31, 2006 6:19 pm
by wrx_nut
all you have to do is splice in the wires beside the drivers seat that go to the fuel pump and t/lights etc.
where abouts do i splice the 2 looms together....
does this mean i will have to change the plug on the fuel tank over beacuse i am using the carby loom?
wrx_nut