Page 1 of 1
Converting 1997 SUBARU LIBERTY 2GEN MY97 RX AWD to manual
Posted: Wed Feb 04, 2009 11:25 am
by Bunna
Just wanted to know if it can be done easily
If so, how much for parts and what parts are needed
thanks in advance
Posted: Thu Feb 05, 2009 9:16 pm
by AlpineRaven
I am guessing its automatic at the moment -
You have these options below -
Convert to Dual Range AWD or Single Range AWD.
You'll need:
Correct ratio rear diff.
Peddles for clutch & brake.
Manual trans centre console
if you're gonna get cable clutch then thats easy you won't need hydraulic clutch master unit, if you do if the gearbox has it then thats more work for you.
If you're getting dual range you will need the lever.
clutch kit (pressure plate, bearings and disc)
manual transmission flywheel
manual transmission cross member
I think you'll also need tailshaft as well.
Cheapest way is to get a donor car!
Cheers
AP
Posted: Thu Feb 05, 2009 9:52 pm
by Gannon
If you do go ahead,... do you wanna sell your auto box cheap?
Posted: Thu Feb 05, 2009 10:03 pm
by Cam
Best bet is just to sell the car and buy a manual, unless your set on that particular car. I think you also have to take it over the pits after you've done it(wa definately) plus resale prob wont be as good as an original manual.
Posted: Fri Feb 06, 2009 7:06 pm
by AlpineRaven
Since he is in Victoria, you won't need to go on the pits or something, just let vic roads know that it has changed the stats... since its an RX Lib, its a 2.5 litre engine and it would be hard to find another RX that is manual.
I would do the same thing if I had an RX Liberty and i would have fitted in an modified dual range transmission (I almost bought an RX few years back but body was stuffed)
Cheers
AP