Page 1 of 1
Falcon ea / eb bull bar to liberty
Posted: Sat Feb 18, 2006 1:34 am
by seagull
I purchased a ally bumper replacment bull bar the other day .To let you all know it bolted up and looks a treat .
I made two brackets from RHS with plates welded on this picked up on the plates on the bull bar .I had to cut a small amout away from bull bar near the corners on the guard as to give it some clearance.
cost $80.00
The whole ford was $300.00
Posted: Sat Feb 18, 2006 3:26 pm
by Suba
send me some pics please Neil .
Mike.
Posted: Sun Feb 19, 2006 1:27 am
by seagull
Ok will take some on sunday for you .( I have the guards & bonnet off the car as well mike , still doing work on it .
I cut 5 holes in the front c section to allow air flow to the rads >
I going to paint the whole thing black
Posted: Sun Feb 19, 2006 12:04 pm
by vincentvega
is this replacing your front bumper or sitting infront of it?
its seriously about time you showed us some pics of this thing mate!
Posted: Mon Feb 20, 2006 1:27 am
by seagull
this is removing the old liberty bumper & fitting the ford ea bull bar .
Yes it gives me the shits why I can not load photos on this site .
I need some one to show me I think .
I have been machining parts for my liberty all day & running wires through the car .I did not tack photos today, but will do and send them to mike .
Trust me you will be very impressed !
Posted: Mon Feb 20, 2006 11:31 am
by vincentvega
mate im more than happy to host any photos you have
I have pm'd you my email. anytime you want photos posted jsut email them to me. I am keen as to see the beast...
Posted: Mon Feb 20, 2006 4:22 pm
by BlackMale
send send send host host host (ar the eagerness
)
Posted: Mon Feb 20, 2006 6:38 pm
by AlpineRaven
I've seen a few heavy duty bull bars from Falcons that are in the yards, can you show pictures here?
Cheers
AP
Posted: Tue Feb 21, 2006 12:09 am
by seagull
Photos sent
Posted: Wed Feb 22, 2006 9:38 pm
by MUDRAT
I'd be interested in seeing the pics too.
Here is a topic that may help you regarding posting photos:
http://www.ausubaru.com/main/modules.ph ... pic&t=1131
Posted: Wed Feb 22, 2006 11:27 pm
by seagull
I will not be trying to post photos untill my area gets broad band , dial up sux
I have emailed the photos ( many )
Posted: Thu Feb 23, 2006 8:01 pm
by seagull
Vincantvega did you get my photos ?
Posted: Fri Feb 24, 2006 1:12 am
by subanator
seagull wrote:I will not be trying to post photos untill my area gets broad band , dial up sux
I have emailed the photos ( many )
Seagull, check this out, as by reducing the image size makes a difference in sending, especially with dialup:
http://www.ausubaru.com/main/modules.ph ... pic&t=1490
You really dont need to view a full size pic most times, right click most internet images on a given webpage and you will find the average size that fits nicely to screen and to send once you expriment a bit.
Would you have any probs in setting up an account (free) for host pics like Imageshack or Photobucket? Just register and post pics, copy link URL's once you have logged out from host site and post them in your posts here - simple huh?
Posted: Fri Feb 24, 2006 9:53 am
by vincentvega
sorry mate have been insanely busy at work this week.
your photos are up here:
http://users.alphadimensions.net/users/ ... s/seagull/
love what you have done with the gearbox crossmember, and the rear arms.
Interesting idea with the throttle body too, although i dont know if it was really necessary. Usually spacing the cooler up to clear the engine support bar is enough, and the rubber hose can take up the change in angle. Maybe not possible with your 3" lift ?
Posted: Fri Feb 24, 2006 8:32 pm
by seagull
I found the piping was made easy with making a spacer ,fits very good now .I made a stainless up pipe at the same time .
very soon rub the paint down & blow some paint over for a new look .