Page 2 of 2
Posted: Fri Nov 06, 2009 9:56 pm
by AlpineRaven
AlpineRaven wrote:You can use EJ main internals in EA box, it'll fit straight in without problems.
The main housing (including bellhousing) is different in length, as EA box is 12mm shorter around where bellhousing is. I'll upload a picture of EA box tomorrow night.
Cheers
AP
This is a picture (sorry its poor quality as taken from camera phone) of EA gearbox.. Now you can see the difference between EJ & EA.
Cheers
AP
Posted: Fri Nov 20, 2009 4:13 pm
by El_Freddo
Also to add to the mix is the fact that the AWD pinion shaft passes THROUGH the lower gearset shaft. The EA's pinion shaft is solid and shares the same shaft with the lower gear set so there is no interchangability of the AWD rear casing to the EA gearsets OR of the pinion shafts to retain the EA ratios while bolting up the AWD rear casing. Make sense?
Also steptoe, have you updated your first post with what you've foundout through this thread?
Cheers
Bennie
Posted: Sat Nov 21, 2009 1:20 am
by steptoe
no is too short an answer
Posted: Sun Sep 12, 2010 11:07 pm
by El_Freddo
Hey, can anyone post up the ratios of each gear for the EA 3.7 ratio box, EJ 3.9 (gen 1) box and EJ 3.7 (gen 2) box?
Just for reference
Cheers
Bennie
Posted: Mon Sep 13, 2010 8:48 am
by AlpineRaven
Gen 1 3.9 diff Aus Del model
1st 3.545
2nd 2.111
3rd 1.448
4th 1.088
5th 0.871
Rev 3.416
Final Drive 3.9
Low Range 1.19
Gen 2 Aus Del model (got this information from Subaru Australia)
1st 3.545
2nd 2.111
3rd 1.448
4th 1.088
5th 0.871
Rev 3.416
Final Drive 3.7
Low Range 1.19
L Series 3.7 should be the same as above I believe.
Cheers
AP
Posted: Tue Sep 14, 2010 1:28 pm
by El_Freddo
Ok, found this on the super reliable wikipedia:
Stock common L series gearbox:
Gear Ratios: 1st 3.545 2nd 1.947 3rd 1.366 4th .972 5th .780, Rev 3.416 Low Range 1.59
L series AWD lockable centre box ratios:
Gear Ratios: 1st 3.545 2nd 2.111 3rd 1.448 4th 1.088 5th .871, Rev 3.416 Low Range 1.196
Do these seem right?
Cheers
Bennie
Posted: Tue Sep 14, 2010 1:42 pm
by AlpineRaven
El_Freddo wrote:Ok, found this on the super reliable wikipedia:
Stock common L series gearbox:
Gear Ratios: 1st 3.545 2nd 1.947 3rd 1.366 4th .972 5th .780, Rev 3.416 Low Range 1.59
L series AWD lockable centre box ratios:
Gear Ratios: 1st 3.545 2nd 2.111 3rd 1.448 4th 1.088 5th .871, Rev 3.416 Low Range 1.196
Do these seem right?
Cheers
Bennie
The L Series AWD box is RX Turbo Box specs..
But the above one seems to be right.
Cheers
AP