Page 1 of 1
Calling all gurus: 2 plug EJ18 ECU?
Posted: Fri Oct 21, 2005 9:15 pm
by BaronVonChickenPants
GDay fellas,
As most are aware I'm putting an '94 EJ18 MPFI into my '84 MY tourer, and my loom is fairly butchered, before I declare it a lost cause I'd like to have a go at debutchereing it, what I could do with is either the wiring diagram or ECU pin out for the following 2 plug ECU:
Thanks,
Jordan
Posted: Fri Oct 21, 2005 11:17 pm
by SuBaRiNo
I got nothing to help u with that. Sorry... never even seen an ECU like that. I will keep my eyes pealed though.
Dave
Posted: Fri Oct 21, 2005 11:22 pm
by BaronVonChickenPants
HAHAHA
thats the response I've been getting from everyone so far.
Hopefully someone knows it.
Jordan.
Posted: Sat Oct 22, 2005 5:58 am
by Outback bloke
Try Sunspares. They may have a new harness for you.
[email protected]
Posted: Sat Oct 22, 2005 7:25 am
by jzk25
For the sake of future reliability you would be best to just get another harness. On monday I will see if they will do a better deal on a harness and prep for you.
Posted: Sat Oct 22, 2005 7:37 am
by BaronVonChickenPants
Thanks Al, I'd still like to have a crack at this one first though.
Jordan.
Posted: Sat Oct 22, 2005 2:15 pm
by jzk25
Fair enough, lucky for you the EJ16/18 is the simplest ecu/wiring you could get.
WHere is the harness cut?
Posted: Sat Oct 22, 2005 5:01 pm
by BaronVonChickenPants
The entire loom was cut at the firewall but there is also a dozen or so wires that have been cut between the ecu and firewall, I did a bit of work on it last night on getting it untangled, it's starting to not look as scary, hoping to get it at least mostly untangled tonight and maybe even worked out a little.
Jordan.
Posted: Sun Oct 23, 2005 5:56 pm
by jzk25
Sunspares will have a pinout and wiring diagram for the ecu but will charge $30 for copies.
Posted: Fri Oct 28, 2005 8:31 pm
by BaronVonChickenPants
OK Al I have the money, where do I send it?
Jordan.
Posted: Fri Oct 28, 2005 8:35 pm
by Ben
Posted: Fri Oct 28, 2005 8:43 pm
by BaronVonChickenPants
Of course *slaps forehead*, thanks Ben.
Jordan.
Posted: Mon Nov 07, 2005 9:51 pm
by BaronVonChickenPants
Thanks Al, the diagrams arrived today and they're awesome, the quality is as good as originals, they'll make things much easier.
I highly recommend the guys at sunspares for any hard to find manuals, diagrams, etc.
I'm still laughing at the envelope and invoice, for everyone other than the sunspares boys, I have 2 hand written envelopes and a professionally printed tax invoice made out to: Jordan Von Chicken Pants.
Thanks again for the diagrams and for a good laugh
Jordan.