MY 5 stud conversion - reaming out the LCA's

Get the most out of your ride & how to make enhancements ...
Post Reply
User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

MY 5 stud conversion - reaming out the LCA's

Post by dfoyl » Thu Feb 26, 2015 11:00 am

Do any current members have experience / specialised tools for reaming out the MY control arm to fit the EJ parts ?

(I believe Adrian/discopotato did, but not sure if he is still around).
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.
Top
User avatar
stenno
Junior Member
Posts: 116
Joined: Wed Oct 03, 2007 9:22 pm
Location: Wauchope NSW

Post by stenno » Thu Feb 26, 2015 4:46 pm

[ATTACH]4549[/ATTACH]

Bought this from usa to use before I tracked down a set of pre made control arms. I think I got the correct taper specs from a nasioc thread that had details.
Hope this is some help
Attachments
ImageUploadedByTapatalk1424932937.532454.jpg
ImageUploadedByTapatalk1424932937.532454.jpg (9.86 KiB) Viewed 872 times
Top
Post Reply

Return to “Conversions, Modifications and Performance Upgrades”