The RS6 - 1st gen Liberty EZ30D Conversion

EJ series vehicles with some conversion they didn't leave the factory with...
User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Re: The RS6 - 1st gen Liberty EZ30D Conversion

Post by El_Freddo » Thu Sep 20, 2018 8:59 pm

Hey DT, any updates on your build? Still running awesome?

Cheers

Bennie

User avatar
Donkeytits1
Junior Member
Posts: 97
Joined: Tue Feb 07, 2012 12:20 pm
Location: Canberra

Re: The RS6 - 1st gen Liberty EZ30D Conversion

Post by Donkeytits1 » Mon Nov 09, 2020 1:58 pm

So should post an update more that two years late...

Car still running like a champ, haven't changed anything about the swap and everything's perfect except
- The cordial bottle overflow has melted a bit
- The catalytic converters are cooked - I am getting cat efficiency codes and I believe they are legitimate

I think the converter issue is due to the fact the cruise RPM on the highway is a fair bit higher than it is with the auto box, and I have done allot of highway kms. I'll either replace the cats or fit an O2 sensor spacer to slow it down a bit

Got the R180 in, and bought the adapter spiders off subaru dave. Didn't seal the boots propperly, water got in and they shat out. So I've got full size shafts and hubs and am in the process of making an ABS sensor solution (the hubs are non-ABS). 4 pot brakes are on the front and bled up, and the rear 2 pots are ready to go.

So it'll be driving again soon

Good on ya AUsubaru and ElFreddo

Post Reply

Return to “Conversion work”