The AUSubaru.com.au Forums

Still not sure exactly which parts I need to replace for 88 L series disc brake conversion using RX turbo brakes.
I have searched the site, could be on old forum, if anyone has saved it?
Is it just the discs, callipers and backing plate?

Or do I need the brake lines, master cylinder ,axles, trailing arms,CV's,etc,

Thanks in advance

Hubs, rotors, backing plate, calipers, short section of rubber line. Pretty easy conversion, knock it over in about 15 minutes easy enough.

You may have done it all by now, but anyway:

http://www.usmb.net/repair/?CurrentDire ... 552686.art