Brumby exhaust suggestions
Brumby exhaust suggestions
What is the way to go for replacing a exhaust on a brumby with fresh heads and webber for some additional power and nicer exhaust note
-
El_Freddo
- Master Member
- Posts: 12626
- Joined: Tue Oct 04, 2005 10:00 am
- Location: Bridgewater Vic
- Contact:
Welcome to the forum pzs!
Good question - check out the search function as I'm sure this has been covered many times before!
I think (from memory) most members would recommend a 2 inch cat back system using the L series Y pipe with a "hotdog" resonator in the centre and a free flowing muffler out back.
My EJ22 has a 2 1/4 inch cat back system with resonator and better flowing muffler out the back and it sounds pretty good to me, got the subi beat which was one reason for the exhaust mod.
All the best!
Cheers
Bennie
Good question - check out the search function as I'm sure this has been covered many times before!
I think (from memory) most members would recommend a 2 inch cat back system using the L series Y pipe with a "hotdog" resonator in the centre and a free flowing muffler out back.
My EJ22 has a 2 1/4 inch cat back system with resonator and better flowing muffler out the back and it sounds pretty good to me, got the subi beat which was one reason for the exhaust mod.
All the best!
Cheers
Bennie
