More wheel id'ing needed
More wheel id'ing needed
What wheels are these? I got them from a local scrapyard for the scrap value so not much lost if they don't work out, they are obviously Subaru and a '99 model but off what? I have looked and checked eBay, this forum as well as every other picture available but no go so far. There are similar wheels (nice 5 spoke ones) off Liberty RS's, Rx's Impreza etc. as well as similar but nothing so far to id these 16x7's. They have the Subaru symbol cast on the back. Sandblasted and repainted either gold or black two pack they wouldn't be too bad would they or forget it and just buy a set of good ones?
[url="http://www.ausubaru.com.au/attachment.p ... 1276514599"[/URL][URL="http://www.ausubaru.com.au/attachment.p ... 1276514665"[/url]
[url="http://www.ausubaru.com.au/attachment.p ... 1276514599"[/URL][URL="http://www.ausubaru.com.au/attachment.p ... 1276514665"[/url]
- Gannon
- Senior Member
- Posts: 4580
- Joined: Sat Nov 05, 2005 10:00 am
- Location: Bowraville, Mid Nth Coast, NSW
Your attachments didnt work, you will have to try again
Current rides: 2016 Mitsubishi Triton GLS & 2004 Forester X
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------
those are off a wrx i think...
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon

Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
- AlpineRaven
- Senior Member
- Posts: 3682
- Joined: Wed Oct 19, 2005 10:00 am
- Location: Melbourne, Victoria, Australia.
Yes they are off from WRX...guyph_01 wrote:those are off a wrx i think...
Its painted black. Normally they would be silver.
Cheers
AP
Subarus that I have/had:
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic

1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic

Exactly the same as what i bought to put on my Liberty. 2000 - 2001 impreza wheels, not sure but i think there is an STi version that came in gold but otherwise the same.
I use this page for identifying subaru wheels
http://www.subaruforester.org/vbulletin ... ter-19106/
I use this page for identifying subaru wheels
http://www.subaruforester.org/vbulletin ... ter-19106/
[SIGPIC][/SIGPIC]
i would have said rx limited edition, like off my mates 95
but yeah his are gold/silve cant quite remember
one thing ive heard of doing is painting MAGS black and putting themon trailers.
wheels make up a hell of a lot of weight on a small trailer
but yeah his are gold/silve cant quite remember
one thing ive heard of doing is painting MAGS black and putting themon trailers.
wheels make up a hell of a lot of weight on a small trailer
if im needed for anything [email protected] and ill try and get back to you.
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
rep for venomVenom wrote: I use this page for identifying subaru wheels
http://www.subaruforester.org/vbulletin ... ter-19106/
brilliant site there
if im needed for anything [email protected] and ill try and get back to you.
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
- bobbyjimmy
- Junior Member
- Posts: 273
- Joined: Fri Jan 04, 2008 3:54 pm
- Location: ACT
my turn!!!
ok from 4WD action website
sorry if the pic is crap
the guy states the wheels are: 15x7" chrome triton rims (for now)
but ive got no idea, triton as in brand? mitsubishi triton?? help us out??
sorry if the pic is crap
the guy states the wheels are: 15x7" chrome triton rims (for now)
but ive got no idea, triton as in brand? mitsubishi triton?? help us out??
- Attachments
-
- 90643535p4140254-small_0.jpg (15.19 KiB) Viewed 4134 times
if im needed for anything [email protected] and ill try and get back to you.
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
- brumbybear
- Junior Member
- Posts: 96
- Joined: Fri Jan 29, 2010 2:21 pm
- Location: Burnie / Tasmania
ok yeah not sure on the bolt pattern
if im needed for anything [email protected] and ill try and get back to you.
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
Hard to tell from the pic but possibly chrome versions of these Mitsubishi Pajero/Triton steel wheels currently listed on ebay. Bolt pattern will be 6x140mm.
http://cgi.ebay.com.au/Four-Pajero-whee ... 2c5505cf06

http://cgi.ebay.com.au/Four-Pajero-whee ... 2c5505cf06
yeah they look quite similar
whether the wheels have been plated or the hubs are custom
whether the wheels have been plated or the hubs are custom
if im needed for anything [email protected] and ill try and get back to you.
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
From memory, Pajero rims are 16" for that era (late 80s/early 90s). Chrome is on the V6, white on the 4-cylinder. My dad had a 91 (last of the boxy shape before they went all plastic) and it was definitely white hubs on the 4-cylinder (gutless 2600 silent shaft - was ok in Sigma's, but pulling around a 2 tonne 4wd...)
Dean.
Dean.
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.
Contact me for reproduction XT6 hubs...and EA82 rear discs.