The AUSubaru.com.au Forums

What would you have to do to get 28's on a lifted impreza ?

I am thinking a 2 inch lift, but the struts are the problem, the impreza have the lowest lower spring perch of all, would you need forester or outback struts to get them to fit?

How much massaging of the inner guards would need to be done, I suppose that you would need either forester or outback wheels with the greater offset as well.

Anyone seen a setup like this or have one that could comment

what year impreza?
They fit on a 2002 impreza with no lift needed

GC8 95 model

Forester or Outback struts n springs will give enough height and clearance to the spring seat.
Then shift the wheel back to the center of the wheel arch(Outback trailing arm brackets or cut n shut trailing arms)
When that's not high enough talk to Suby Wan about a lift kit.
Daza.

You can fit anything on anything if you try hard enough :P

http://image.fourwheeler.com/f/SubaruGL ... on-33s.jpg

go with early forester struts.. outback gear is too stiff for the lightweight impreza shell

why have you decided on 28's? any particular reason?

Will have a 2 inch lift kit for sure, looking at 28's as there seems to be a lot more choice in the 215/70/16 size which equates to more availability and cheaper price, I spent ages looking for a reasonably priced 215/65/16 before when i had the lifted lib but was not many to be found and the price was always high.

have a look at 205/75R15

plenty of choices

I have 2 sets of 16 inch wheels already with 5 wheels each 1 forester and 1 wrx, I haven't seen a set of 5x 15's yet

How much lift will forester struts and spring give it with the 50mm lift on top?