pug nuts

32ford · Post by **32ford** » Sat Dec 12, 2009 8:28 pm

anybody else out there running pugeot 505 alloys? I am wondering about where you get the right wheel nuts.

steptoe · Post by **steptoe** » Sun Dec 13, 2009 3:20 am

Gordon, send Lturbo Thomas a hoy on this one

smiles · Post by **smiles** » Sun Dec 13, 2009 3:52 am

Yeah- I'm looking for some too. I heard something about VW nuts having the ball seats that we need. I'll let you know if I find a good source..

T'subaru · Post by **T'subaru** » Sun Dec 13, 2009 10:03 am

showthread.php?t=12138&highlight=peugeot
this should help out, but verify degrees needed for a 12x 1.25 sub stud against what a pugeot 505 turbo used on their alloys.

32ford · Post by **32ford** » Mon Dec 14, 2009 10:44 pm

well I have found a place that will make exact replicas of peugeot nuts for 12.50 each + gst
http://www.galproeng.com.au/ they say it will take six weeks because of christmas and the platers going on holidays
I also found that there are adapters (washers) available from the 2009 empi volkswagen catalogue, on page 16
thanks for the replies, I am going with the galpro nuts, as I only want to replace the tatty ones.

LTurbo · Post by **LTurbo** » Tue Dec 15, 2009 9:11 pm

32ford wrote:well I have found a place that will make exact replicas of peugeot nuts for 12.50 each + gst
http://www.galproeng.com.au/ they say it will take six weeks because of christmas and the platers going on holidays
I also found that there are adapters (washers) available from the 2009 empi volkswagen catalogue, on page 16
thanks for the replies, I am going with the galpro nuts, as I only want to replace the tatty ones.

Thanks for that I was just wondering if it was possible to get new ones. I originally got mine off the aussiefrogs forum, very helpfull bunch over there.

Having any issues with the offset of your pug wheels in the rear?
Cheers

32ford · Post by **32ford** » Wed Dec 16, 2009 2:33 pm

no problems at all, what problems do you have?

LTurbo · Post by **LTurbo** » Wed Dec 16, 2009 4:28 pm

32ford wrote:no problems at all, what problems do you have?

The wheels stick just a little from the guards. If the car is full of gear and/or people and you go over a big bump or dip at speed the tyres will actually come up and hit the guards. Its only just hitting on the inside of the guards.

sublime · Post by **sublime** » Thu Jan 14, 2010 6:29 pm

Did you end up getting the pug nuts 32ford?

I would like to buy a whole set and was wondering how you went with GalPro?

32ford · Post by **32ford** » Sat Jan 16, 2010 8:35 pm

havent got them yet, they said they should come back from the platers this week, I'll probably pick them up on thursday if works not to busy.

steptoe · Post by **steptoe** » Fri May 25, 2012 11:30 pm

and that was January 2010 ....BUmP !

Wonder how plentiful these nuts are in New Caledonia ?

sublime · Post by **sublime** » Fri May 25, 2012 11:52 pm

I ended up buying my set from a member on USMB...

http://www.ultimatesubaru.org/forum/sho ... hp?t=49131

coupe · Post by **coupe** » Sat May 26, 2012 1:09 am

I still have a full set from the 390ies i had.

steptoe · Post by **steptoe** » Sat May 26, 2012 10:51 am

Found a company on ebay dot you k , 99 p each, just confirming they fit or not, with nncoolg specs coming up...... big 45 degree taper, 19mm hex bar nut, not captive washer, M12 1.25 pitch, chrome, looking good

sublime · Post by **sublime** » Sat May 26, 2012 4:25 pm

steptoe wrote:big 45 degree taper, 19mm hex bar nut, not captive washer, M12 1.25 pitch, chrome, looking good

The Pug lugs are conical, no taper as such.

steptoe · Post by **steptoe** » Sat Jun 09, 2012 7:21 pm

http://translate.google.com.au/translat ... md%3Dimvns

Just to show that one Pug nut is not the same as other Pug nuts - or studs.....

4x4brat · Post by **4x4brat** » Sun Jun 10, 2012 10:03 am

i made some reproductions (currently SOLD OUT)

i will make more if enough members show interest

please e-mail if you are looking for Lugs........
cngtool@pacbell.net

B00sting · Post by **B00sting** » Sun Jun 10, 2012 2:29 pm

4x4brat wrote:i made some reproductions (currently SOLD OUT)

i will make more if enough members show interest

please e-mail if you are looking for Lugs........
cngtool@pacbell.net

will your repros suit the 15" pug steelies also?
cheers.

4x4brat · Post by **4x4brat** » Mon Jun 11, 2012 1:52 pm

No......sorry these are made for the alloy wheels

if you need them made for the steel wheels all i would need a lug nut to copy!!

B00sting · Post by **B00sting** » Mon Jun 11, 2012 2:53 pm

4x4brat wrote:No......sorry these are made for the alloy wheels

if you need them made for the steel wheels all i would need a lug nut to copy!!

haha i guess i just need to find one then!