Enkei Wheels ...

Get the low down on your ride ...
Post Reply
User avatar
Bantum
General Member
Posts: 1994
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

Enkei Wheels ...

Post by Bantum » Tue Mar 12, 2013 9:16 am

Have you been looking for a neat set of 4 x 130 mm PCD rims ... ?

EDIT : I was looking for 4 x 140 mm PCD - but came across these which I do like the look of - but ...

Well Enkei have brought back a classic :

Image

Specs : ( Add : had to find it )

Image

Was looking at these :

COMPE NEW Classic in White or Gunmetal
Stock Code: 477-555-1517 (WP or GM) Size: 15'' x 5.5, Inset: 17, PCD: 4x130, Bore: 87
Cap# A477-CAPCP

Cheers, Bantum ... :)
Top
User avatar
dwayneb
Junior Member
Posts: 282
Joined: Wed Oct 05, 2005 10:00 am
Location: chambers flat/qld

Post by dwayneb » Tue Mar 12, 2013 9:35 am

would be better if they came in 4 x 140 to fit MY's and L's though
Back in a Subaru, 03 Forester XS:D
Top
User avatar
60766244
Junior Member
Posts: 586
Joined: Fri Nov 09, 2012 3:32 pm
Location: Kalamunda, Western Australia

Post by 60766244 » Tue Mar 12, 2013 4:20 pm

4x140 I hope you mean?

Last quote I got on some 4x140's was $1200 for a set from SA.
Otter the 2004 Outback with all the fruit.
Image
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?

|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||

Top
User avatar
Bantum
General Member
Posts: 1994
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

Sizes ...

Post by Bantum » Tue Mar 12, 2013 7:42 pm

60766244 wrote: ... 4x140 I hope you mean ... ?
Nope - Sorry they don't appear to make 'em in that size yet ... :mad:

Doh ... :( ... P.S. - I've added the chart above listing sizes ... ;)

Ciao, Bantum ...
Top
User avatar
Silverbullet
Senior Member
Posts: 2920
Joined: Mon Aug 23, 2010 6:20 pm
Location: Adelaide

Post by Silverbullet » Tue Mar 12, 2013 7:47 pm

Damn, so close yet so far ;)
Will it ever end!?
-EA81 TWIN CARB!!!!
-L series 5 speed
-Custom paint job
-2" lift
-Full custom re-wire
-L series front end
Image
Top
User avatar
El_Freddo
Master Member
Posts: 12626
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:
Contact El_Freddo

Post by El_Freddo » Wed Mar 13, 2013 7:27 pm

Glad you haven't put an order in not realising the PCD is incorrect for the MY/L's...

Would be sweet though!

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube
Top
User avatar
60766244
Junior Member
Posts: 586
Joined: Fri Nov 09, 2012 3:32 pm
Location: Kalamunda, Western Australia

Post by 60766244 » Wed Mar 13, 2013 7:40 pm

:cool: What'd they quote you on those puppies? some 4x114.3's would always be very pretty on my ute... *Dreaming*
Otter the 2004 Outback with all the fruit.
Image
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?

|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||

Top
User avatar
Bantum
General Member
Posts: 1994
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

4x140 mm PCD ...

Post by Bantum » Thu Mar 14, 2013 4:31 pm

Didn't get one, but not cheap I'd say ... :(

Another similar wheel can be found here :

Performance Wheels : SUPERLITE

Image

& yes it does come in 15'' x 4x140 mm PCD ... :razz:

I think you can still get this one too !

Image

More Details : performancewheels.com.au
Top
User avatar
60766244
Junior Member
Posts: 586
Joined: Fri Nov 09, 2012 3:32 pm
Location: Kalamunda, Western Australia

Post by 60766244 » Thu Mar 14, 2013 4:51 pm

Bantum wrote:Didn't get one, but not cheap I'd say ... :(

Another similar wheel can be found here :

Performance Wheels : SUPERLITE

Image

& yes it does come in 15'' x 4x140 mm PCD ... :razz:

I think you can still get this one too !

Image

More Details : performancewheels.com.au
Yeah they're the ones who quoted me $1200 for a set of 5 delivered to WA from SA.

When I don't need $1200 I'll get some. :D
Otter the 2004 Outback with all the fruit.
Image
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?

|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||

Top
User avatar
Rodeo4jake
Junior Member
Posts: 297
Joined: Fri Oct 19, 2012 5:42 am
Location: Tylden Victoria

Post by Rodeo4jake » Thu Mar 14, 2013 7:09 pm

I think I read somewhere else that even the Performance wheels are now discontinued:(. Seems the wheel manufacturers don't like 4x140 Subie owners. Speedy Desert Rats are gone too. Notice on eBay there is a wheel maker in QLD making steelies again for a reasonable cost.
Any wonder people redrill the hubs, it's the easiest thing to do in the end.

Cheers Jake
Top
User avatar
sublime
Junior Member
Posts: 358
Joined: Sun Feb 04, 2007 12:09 am
Location: Albury, NSW

Post by sublime » Thu Mar 14, 2013 10:19 pm

Speedy Desert Rats are now made/available from King Wheels so you still buy them.
Old Boxer Tricks
1980 Brumby
1978 4WD Station Wagon
1974 DL Sedan
1974 GSR Coupe
Top
User avatar
jims
Junior Member
Posts: 162
Joined: Fri Dec 07, 2012 5:00 pm
Location: Kalamunda

Post by jims » Fri Mar 15, 2013 12:25 am

Hey 607, if you're chasing 14inch 4x140 midland opposite lock do a set of dynamic steelies for $75 each. I have one for my spare. Not the same offset as the genuine subaru wheels (sticks out a good inch) but I don't mind as its only my spare.

Cheers, James
Top
User avatar
60766244
Junior Member
Posts: 586
Joined: Fri Nov 09, 2012 3:32 pm
Location: Kalamunda, Western Australia

Post by 60766244 » Fri Mar 15, 2013 6:49 pm

jims wrote:Hey 607, if you're chasing 14inch 4x140 midland opposite lock do a set of dynamic steelies for $75 each. I have one for my spare. Not the same offset as the genuine subaru wheels (sticks out a good inch) but I don't mind as its only my spare.

Cheers, James
Hey cheers man.
I picked up a set of 14"s with tyres on them, they just need a really good spray down and newer, nicer tyres on them.

I don't use them as I need to give that Brumby a lift at some point... :rolleyes:

Before I picked up some I was looking at new ones as I had more cash at that point. :P

I wanted that wheel-arch rubber so I could fit it when I get around to putting the 14"s on regularly, as right now, the fronts rub hard when I hit small bumps with them on and the 14's stick out a bit at the front with them on.

Lift will come someday :rolleyes:
Otter the 2004 Outback with all the fruit.
Image
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?

|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||

Top
User avatar
Carlton
Junior Member
Posts: 6
Joined: Wed Apr 24, 2013 12:39 am
Location: Canada

Post by Carlton » Thu Apr 25, 2013 4:15 am

Those rims sounds good.. I like the design of those rims, because they are different from others. But I think they are also more expensive then normal stock rims. Because the quality of the rims looks very fine. Good sharing.
Top
User avatar
Bantum
General Member
Posts: 1994
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

Post by Bantum » Tue Aug 20, 2013 2:05 am

I'm not sure what brand these are ...

Image

Add :

Image

But they are in Tassie if you want them ... :)

Cheers, Bantum ...
Top
User avatar
El_Freddo
Master Member
Posts: 12626
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:
Contact El_Freddo

Post by El_Freddo » Tue Aug 20, 2013 7:54 pm

Bantum wrote:I'm not sure what brand these are ...

Image
These are awesome rims... Would love them for the red brumby, but that little stretch of water makes it difficult, as would getting Mrs El Freddo's permission!

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube
Top
User avatar
Bantum
General Member
Posts: 1994
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

Post by Bantum » Tue Aug 20, 2013 10:21 pm

Yeah, I was thinking the same ... :)
I would love to have a set for the '76 wagon, but I'm not sure how much it would cost to get them shipped over to the main land ... :(
Ciao, Bantum ...
Top
User avatar
Bantum
General Member
Posts: 1994
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

Gotti Wheels ...

Post by Bantum » Mon Nov 25, 2013 2:09 am

I've been searching for more 4x140 rims & came across these :

Image

More details here : New Shoes - Gotti Rims

There growing on me - but they might be bit hard to find here as there French made ... :rolleyes:

There's more Gotti wheels on this site : http://www.gotti.fr/categorie.php?id=gotti

Like this one - Gotti 073 Alpine :

Image

GOTTI 073A : 5x13" => 14x13", 4x140 PCD - Fits : Alpine A110, Alpine A310, Honda Civic SB ... !!!

I'm thinking I might put together a list of 4x140 wheels / rims for the wiki page ... :)

Cheers, Bantum ...
Top
User avatar
87rxturbo
Junior Member
Posts: 84
Joined: Sat Jan 01, 2011 8:14 pm
Location: SA

Nice wheels!

Post by 87rxturbo » Mon Nov 25, 2013 12:02 pm

Yeah i came across those Gotti wheels awhile ago ,i was seriously considering importing some when i had the RX ,but i think they are around $500 per wheel! From memory you can have them in sizes up to 12 inches wide.....just checked,make that 14 inches wide!
http://www.gbsalpine.com/wheel/gotti/tarif_gotti.html
Top
User avatar
phil nelis
Junior Member
Posts: 100
Joined: Tue Aug 31, 2010 12:55 pm
Location: collingwood park qld

Post by phil nelis » Thu Nov 28, 2013 8:59 pm

How would people feel about a wheel based on the scorpion style that used to be available.
Top
Post Reply

Return to “Brakes, Wheels and Tyres”