The ***ALL NEW*** AUSubaru.com.au Forums

Bantum wrote:Steptoe has found another :



Anybody know what it is ?

Cheers, Bantum ...

I had a set of these (in white) on my '86 RX Turbo in 15".

Bantum wrote:& just to make sure you not confused yet, we also have these in 14" ...

Jacksons : ( 14 x 6" +? )


Speedy Desert Rats : ( 14 x 6" +? )



+ any others out there yet to be found ...

Note : When I mention the term 'Wagon Wheel' I'm referring to the number of spokes - usually 8 ...

Cheers, Bantum ...

I had a set of these in 14" on my '83 MY wagon with 2" lift

JP147 wrote:

Got any more Info / Front on shot of these ? Dimensions, Stamping etc. would be handy ...

Cheers, Bantum ...

These also turned up ( thanks to Lee & Willy ) :



Not sure of the dimensions but was given : 15" x 7" +? ( offset ? )

Found here : http://www.ebay.com/itm/BRUMBY-LEONE-L- ... 7675.l2557



Edit : P.S. - Waiting on a better shot - ebay ones have gone ...

Cheers, Bantum ...

Try these:

14x6 Rally Harts.

Bantum wrote:Got any more Info / Front on shot of these ? Dimensions, Stamping etc. would be handy ...

Cheers, Bantum ...

They are 13" and the tyres on there now are 205 wide. There are no stampings on the wheels.
Someone told me once that they might be a replacement for Mazda Bongo rear duallies. They must not be common though because I have never seen or heard of any others.

I am not sure what you meant by front shot, but here are 2 more pictures:






I put a ruler into one, it is probably over 10cm deep from the centre to the outer rim.

Thanks JP, will add it to the list ...

Mean while, here is some Facebook action to keep an eye on:

https://www.facebook.com/media/set/?set ... 532&type=1

Edit : FB has deleted these again ... argg ...

Cheers, Bantum ...

Another wheel that has turned up on FB :



14x6" 'Eight Spoke' by Gecko Wheels ... ( & from all reports you can order them with the correct PCD )

For more see here : http://www.geckowheels.com.au/index.html

Cheers, Bantum ...

Found these wheels on UFOwheels,com a Chinese factory who will ship to Australia provided a minimum of 40 wheels are ordered 14 x 6" with 4 x 139.7 PCD. USD 22.00 painted USD34.00 Chromed + Freight cost which they will send an estimate on. Problem is getting 10 bods interested

majordad1 wrote:Found these wheels on UFOwheels,com a Chinese factory who will ship to Australia provided a minimum of 40 wheels are ordered 14 x 6" with 4 x 139.7 PCD. USD 22.00 painted USD34.00 Chromed + Freight cost which they will send an estimate on. Problem is getting 10 bods interested

I would get 5, one for the spare. You might not need 10 people.

A good presentation of what is available.

PCD stands for Pitch Circle Diameter:

http://www.wheelfitment.eu/what-is-the-PCD/

not speaking for myself, there may be more interest in 15" rims and if they are that cheap before landing, maybe insist on min order from in here of six - a spare and spare spare. Faster way to build up the numbers

Only prob is they don't do a 15" in the 139.7 x 4 PCD that I could see unless I missed something. Have a look at UFOwheels.com

Further development on the UFOwheels.com China connection. The maximum offset available with the 14 x 6 wheel is a +18mm. Standard Brumby with 13 x 5.5 " factory Sunny's is a + 42mm. Difference of 24mm + 12mm additional rim width would see a tyre on the front sticking out beyond the guard edge which would invite all sorts of issues with scrubbing. They have said the could set up a greater offset but would require a large order of 100 + wheels. To bad so sad worth a try I guess

If your after a good 'new' wheel - Check out the 'Brumby Wheels' that was posted earlier ( a few pages back ) Phil has already done the hard bit, so you just need to cough up for a set ...

Cheers, Bantum ...

Thanks Bantum, looked at that website max offset they do is 15+ same clearance issues

"new" old 13" JDM encki

Nice find there - seen them somewhere before on FB ...

I will have to add them to the next edition ...

Ciao, Bantum ...

Bantum wrote:Here's few new ( Ye Olde ) wheels found recently :

Add : Link to go here :

[
and this one :

Add : taken from here : showthread.php?t=25053



I'm not sure what it is yet ... ( think it could either be a Jackman or an early wagon wheel copy )

Can any one help ?

Cheers, Bantum ...

these are actually 14" rims not 13" - sorry for not specifying that earlier.