List of 4x140 PCD Wheels ...
Moderator: Junior Administrator
jellybeans not for sale
My mate approached the owner and neither the wheels not the car are for sale.
So thats that
So thats that
henpecked wrote:Not mine, but they may be available if anyone wants me to approach the owner.
I really wish I wasn't so time poor, I might be able to keep up with things.
Last night was my first time near the forum for months.
Not sure if I missed this in this discussion but.
Focusing on factory steel rims and Subaru supplied (white) Sunnies (13" 4 x 140 stud)
1. is there a difference in offset between the early 80's Brumby rims (steel and sunnies) and the same in later 80's/90's rims.
2. if so how did it differ (what is the offset)
3. did these factory Subaru steel and sunnies differ in width. If so what widths
I gather there is a difference between the MY and L series but I am not sure about differences between the Brumbies over the years.
I am still considering something other than the factory Subaru alloys.
Last night was my first time near the forum for months.
Not sure if I missed this in this discussion but.
Focusing on factory steel rims and Subaru supplied (white) Sunnies (13" 4 x 140 stud)
1. is there a difference in offset between the early 80's Brumby rims (steel and sunnies) and the same in later 80's/90's rims.
2. if so how did it differ (what is the offset)
3. did these factory Subaru steel and sunnies differ in width. If so what widths
I gather there is a difference between the MY and L series but I am not sure about differences between the Brumbies over the years.
I am still considering something other than the factory Subaru alloys.
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Sorry Cliff - missed your post, see the 'download' section ( link on fist page ) for a complete list of 4x140 PCD Wheels.
To your enquiries :
1 - Yes.
2 - Earlier ones had 35mm, later were 45mm offset.
3 - Factory standard 5", aftermarket ones vary from 5" to 6" in width.
Have fun trying to source them ...
Cheers, Bantum ...
To your enquiries :
1 - Yes.
2 - Earlier ones had 35mm, later were 45mm offset.
3 - Factory standard 5", aftermarket ones vary from 5" to 6" in width.
Have fun trying to source them ...
Cheers, Bantum ...
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Cosmic ...
Found another that may work :
Cosmic Mk 2/3/4 ...
You may note the dimension sizes on table don't show pcd ....
From Gum Tree :
I think the ones shown on Gumtree are redrilled ... ( could be wrong )
Cheers, Bantum ...
Cosmic Mk 2/3/4 ...
You may note the dimension sizes on table don't show pcd ....
From Gum Tree :
I think the ones shown on Gumtree are redrilled ... ( could be wrong )
Cheers, Bantum ...
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Update ...
Sorry it's been a while since I posted anything on this, am now working on a new page to update with all the wheels I've found :
Subaru 4x140 PCD Wheels
When done I'll also update the Index on here ...
Ciao, Bantum ...
Subaru 4x140 PCD Wheels
When done I'll also update the Index on here ...
Ciao, Bantum ...
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Re: List of 4x140 PCD Wheels ...
Did an update recently to the Guide & have posted up some more new wheels found on it here :
Wheel Reference Guide V4
Sorry haven't done anything on here recently.
Ciao, Bantum ...
Wheel Reference Guide V4
Sorry haven't done anything on here recently.
Ciao, Bantum ...
-
- Junior Member
- Posts: 10
- Joined: Wed Mar 31, 2021 12:33 pm
Re: List of 4x140 PCD Wheels ...
Hi there i cannot seem to access any of the links - all say something of the order 'page cannot be found'. What am i doing wrong?!