wheel spacers

Post by **Captain Obvious** » Sat Nov 11, 2006 9:18 pm

hey all,
im changing my trailer hubs to subaru stud pattern to put subi wheels on, the problem is the offset of the subi rum sits closer to the side of the trailer,,

just wondering were i would find some spacers to space the wheels out, would super cheap or some one along those lines have them of will i have to make some???

cheers
bryan

Subafury · Post by **Subafury** » Sun Nov 12, 2006 10:08 am

supercheap dont. not reallt sure where u can get em from

midnight · Post by **midnight** » Sun Nov 12, 2006 10:30 am

Would it be hard to get a couple made?

Brumby Boy · Post by **Brumby Boy** » Sun Nov 12, 2006 1:21 pm

they r illegal aint they

Matt · Post by **Matt** » Sun Nov 12, 2006 2:12 pm

wouldn't it be easier to chase down a longer axle, and i agree that are illegal

Post by **Captain Obvious** » Sun Nov 12, 2006 7:00 pm

hmmm food for thought, will look into the leagal side of things

MUDRAT · Post by **MUDRAT** » Mon Nov 13, 2006 5:13 am

I think they're illegal for use on a car - not sure about a trailer.

My local parts store stock them, they're not that expensive but I can't think of the brand just off the top of my head.

Outback bloke · Post by **Outback bloke** » Mon Nov 13, 2006 5:44 am

I have them on my car and am of the belief that they aren't illegal IF there still remains 8 full turns of thread in the wheel nuts. Get them from Goodyear. They cost around $6 each and come in a few different thicknesses.

chriSTIan · Post by **chriSTIan** » Mon Nov 13, 2006 8:59 am

Where can i find subi hubs for my trailer?
Did u guys redrill existing ones?

Outback bloke · Post by **Outback bloke** » Mon Nov 13, 2006 3:50 pm

Pretty much any trailer place can get them for you.

Post by **Captain Obvious** » Wed Nov 15, 2006 5:38 pm

i re-drilled my hubs but you need to be sure you get hubs that the subi cente will go over, do you mean beaurepairs brett??