wheels help

Get the low down on your ride ...
Post Reply
User avatar
mungo
Junior Member
Posts: 1
Joined: Thu Apr 10, 2008 1:12 pm

wheels help

Post by mungo » Thu Apr 10, 2008 2:29 pm

i have a 88 brumby with 14" wheel 4 stud all wrong offset i have heard that an adapter kit is available to fit liberty wheels if not how change studs pattern
Top
User avatar
Alex
Elder Member
Posts: 5405
Joined: Wed Nov 23, 2005 10:00 am
Location: Perth
Contact:
Contact Alex

Post by Alex » Thu Apr 10, 2008 2:38 pm

search is yo friend buddy.

alex
my07 Outback
my13 Hyundai i45(shhhh)
my02 Gen3 Liberty limited ed.

previously
L-series wagon, LSD, EJ20turbo, 29in tyres, 'wanky wagon'
2000 gen3 outback, lifted, otherwise stock.
Top
User avatar
Suby Roo
Junior Member
Posts: 357
Joined: Fri Oct 05, 2007 11:37 am
Location: Mangalore

Post by Suby Roo » Thu Apr 10, 2008 2:38 pm

Well yo can either get a cross bred kit from somewhere (?) or drill the hubs out <-- Illegal though
'91 Legacy GT wagon, 2.35 turbo, td05-20g, 05sti spec c dccd 6 speed, 3 inch, front mount, power fc
Top
User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Post by dfoyl » Thu Apr 10, 2008 6:05 pm

Or use adaptors...illegal also though :)

How is your offset wrong - wheels stick too far out ?

Dean.
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.
Top
Post Reply

Return to “Brakes, Wheels and Tyres”