My 1985 Sherpa

[Chris_Rogers]

that makes sense!

novel idea.

while you are at it drop a set of 4" speakers into the front doors. they will fit just foward of the window winder. use the speaker grills off a ford laser to hide them

[JET-6]

that makes sense!

novel idea.

while you are at it drop a set of 4" speakers into the front doors. they will fit just foward of the window winder. use the speaker grills off a ford laser to hide them

Dont happen to have any pics do you?

I was thinking maybe some speaker in the kick panels, but the 6x9's in the rear are pretty sweet by themselves since they are mounted to riveted alloy plate(behind the trim)

[Chris_Rogers]

I dont. but if you look closely with the panel off it will make sense. I used sanyo in my original one. they are flat and sit nicely behind the panel. fors speaker grill (its a steel one) sits flush with the door panel and looks stock.

[JET-6]

I dont. but if you look closely with the panel off it will make sense. I used sanyo in my original one. they are flat and sit nicely behind the panel. fors speaker grill (its a steel one) sits flush with the door panel and looks stock.

Id love to see some pics if you have them, i would like to add some front fill but didnt really want to hack the car up at all, atleast cut any metal

[Chris_Rogers]

never took pics of it. the only thing I took pics off was a mirror I did with a radio display in it.

[Chris_Rogers]

look at the door with the panel off . the above will make sense then.

[theclick]

So when is the lift going in? :P

[Cam]

and the sti drivetrain?

[JET-6]

No lift, i want it lower but its just not gunna happen, the suspention is well below its workable levels now, bump stops cut and all, and the turbo is coming, after x-mas sometime

[JET-6]

Bump, my little baby is now for sale thanks to new work, tried to set up an add in the for sale section but its not working, send PM to admin

Matt

[Suba]

Please read this post jet-6 showthread.php?t=7424

Mike.