The AUSubaru.com.au Forums

Hey guys, can anyone provide advice on whether the Brumby fuel sender / wiring will hook up to the Impreza guage and actually work?

Also does anyone know if the accelerator switch not being connected effects anything, what does it actually do?

Finally if any one has photos of WRX prop shaft mounted at/in the centre of the brumby tunnel, do you need rubber or anything to reduce vibration, and how you have done the gearbox linkages this would be appreciated. Linkage dont look like they can be centred as prop shaft will be in the way.

G'day mate, while I don't have any answers, this post would probabily be more effective in the "troubleshooting" section of the forum

Cheers

Bennie

PS - Mods, if you read this thread, please delete this post

The linkage goes above the prop shaft....yes that's right, you will probably only have millimetres to spare!
Prop shaft usually people modify the existing one rather than use the WRX one. You can quite easily go for a single piece shaft without even a centre bearing, it's not necessarilly required.

brute wrote:Hey guys, can anyone provide advice on whether the Brumby fuel sender / wiring will hook up to the Impreza guage and actually work?

in a word, no, not sure of the fix either coz mine still doesn't work...