Page 1 of 1

My L Series (Updated)

Posted: Thu Sep 03, 2009 10:38 am
by someguy
Hi All.

I had my L series on here before but it was done with the iphones crappy camera.

Its a 1990 L Series (EA82 Carbed) I have owned it for 3 years and it has just rolled over to 350,000

So I gave the car a wash and did it properly this time.


Pics:
http://itdomainaustralia.net/staff/glyn ... ars?page=1

(Yes its a street L series, i do take it offroading every now and then but nothing to heavy).


Mods:
* Boss Race Wheel
* Boss Race Pedals
* SAAS Gear Shifter
* Pioneer Headunit + DNA 160W Speakers
* iPod Dock (Permanently mounted to the dash, hooked up to headunit via AUX).
* 1GB iPod Shuffle (I bought it to keep in the car as I hate CD's)
* SAAS Cup Holder (It was too hard to have drinks between my legs and change gear at the same time).
* 2.5" straight pipe (no cat) all the way to the back with a 5" Canon muffler.
* 3" Tacho.
* Navman S150 GPS.

Future Mods:
* Either an MPFI EA82 or EJ22 (Sick of the carby's crap economy)
* Redrilled hubs with WRX alloys.
* Tow Bar.
* Possibly bucket seats from a STI (If i can be bothered modding the rails).
* Lowered king springs (to stop that annoying body roll around corners)



I am also looking around for another L Series or Leone to build up as a Lifted dedicated offroader so I don't ruin this one.

Posted: Thu Sep 03, 2009 10:57 am
by AndrewT
lol at the high performance silver painted vacuum tubes near the air cleaner :)
Congrats on the high milestone, they just keep going hey!

How do you plan to re-drill hubs to allow WRX wheels to be fitted? As far as I know this is not possible with the standard wrx 5-stud pattern.

Posted: Thu Sep 03, 2009 11:03 am
by someguy
AndrewT wrote:lol at the high performance silver painted vacuum tubes near the air cleaner :)
Congrats on the high milestone, they just keep going hey!

How do you plan to re-drill hubs to allow WRX wheels to be fitted? As far as I know this is not possible with the standard wrx 5-stud pattern.
Yep, love my paint job :P


There is a fair few people that have them on ultimate subaru.

I am trying to get in contact with one and ask them how they did it.

(Although I think they might have had an engineer make an entirely new one for them.)