Page 6 of 6
Posted: Fri May 08, 2015 8:27 am
by steptoe
nice, like your rims too, got three like it too I think, and a fourth almost like the other three
Engineering student?
Posted: Fri May 08, 2015 9:05 pm
by El_Freddo
Nice touches to the engine with the red rocker cover gaskets.
I too like your rims. I'd like another one or three... long story!
Should be an awesome addition to the brumby (the EA81S!).
Cheers
Bennie
Posted: Wed Aug 12, 2015 12:16 am
by phantomD
Twin carby engine is going great guns, it is an absolute rocket machine and effortless to drive. Engine does not really warm up which is my fault because my radiator fans are locked on - need to go see a sparky about a modification to the temperature sender circuit.
Fouled the spark plugs completely after a couple of weeks - they were absolutely black - could be a combination of engine running cold and more fuel or perhaps the carbs are dumping far too much fuel in.
My mechanic mentioned to me that V&E Rigoli used to race a Brumby...they normally do fuel injected stuff but maybe they might be interested in a side project...
Posted: Wed Aug 12, 2015 8:31 am
by steptoe
maybe try ebay for an adjustable temp device to control the fans or for ten times the price one from Brisbane TM4 by watchdog ?
Posted: Sun Aug 16, 2015 11:45 pm
by Tweety
After so many adjustable and electronic devices to turn on/off thermo fans in all my cars over the years I returned to the good old sender in the radiator. Got a 88 degree one with 82 degree thermostat. Relay, fuse. That's it.
I run a relatively small Alfa 33 radiator on the trike and thermos rarely come on mainly traffic in summer. Bolt in and forget.
The less digital/electronic devices on my machine the better.
Posted: Tue Jul 04, 2017 5:59 am
by phantomD
Anybody know somebody in greater Sydney area that can get my twin carbs running properly?
Posted: Thu Jul 06, 2017 3:36 am
by Bantum
Try Gerard ( Willy ) he knows a fair bit about carby's ...
Cheers, Bantum ...
Posted: Sat Aug 26, 2017 12:28 am
by phantomD
Thank you