who is/was rsrlegacy
who is/was rsrlegacy
I am looking for rsrlegacy from Adelaide. rsrlegacy was the name on the old board, have you got a new name for the new board? Does anyone know what happened to him or how I can contact him.
On the old board he said he could provide new dual core radiators for the L-series for $350.
On the old board he said he could provide new dual core radiators for the L-series for $350.
- subarursliberty
- Junior Member
- Posts: 200
- Joined: Tue Oct 04, 2005 10:00 am
- Location: South West Sydney
- Contact:
http://www.rslibertyclub.org/forums/mem ... er&t=52874
Different forumns but I recon its the same guy.
Different forumns but I recon its the same guy.

PM me and I will send you his Mobile number,
He runs Subareck in Adelaide now. PAUL is his name.
He runs Subareck in Adelaide now. PAUL is his name.
1989 Subaru WonderBrumby II
EJ22 Dual range AWD lifted, widened and much happier now thanks very much.
1991 L Series wagon, white and perfectly normal apart from the ticking, no I think that is normal.
Jet boat..webbered EA81 with a hybrid tin dish welded and glued to it.
EJ22 Dual range AWD lifted, widened and much happier now thanks very much.
1991 L Series wagon, white and perfectly normal apart from the ticking, no I think that is normal.
Jet boat..webbered EA81 with a hybrid tin dish welded and glued to it.
- PeeJay
- Junior Member
- Posts: 685
- Joined: Tue Oct 04, 2005 10:00 am
- Location: Riverstone, Sydney
- Contact:
I've got it in the car, but I only just got a coolant tank yesterday so I haven't had a chance to run it yet. It's connected to my EJ20T.
One thing that could be done better is to have the bottom outlet at a 45deg. angle. I managed to find a hose with a 90deg. bend that fits, but it rubs hard against the cam cover on the engine. I'm a bit worried about it rubbing through the hose.
The top outlet is on a 45deg. angle and fits up nicely.
One thing that could be done better is to have the bottom outlet at a 45deg. angle. I managed to find a hose with a 90deg. bend that fits, but it rubs hard against the cam cover on the engine. I'm a bit worried about it rubbing through the hose.
The top outlet is on a 45deg. angle and fits up nicely.