Brisbane bods help spy work....

Go wild here with what ever takes your fancy ...
Post Reply
User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Brisbane bods help spy work....

Post by steptoe » Sat Sep 26, 2009 9:55 am

deleting some details in case anyone gets upset
ta

User avatar
FROG
General Member
Posts: 1409
Joined: Fri Feb 23, 2007 12:41 pm
Location: UNDER THE SOUTHERN CROSS GRIFFITH NSW
Contact:

Post by FROG » Sat Sep 26, 2009 10:54 am

:roll:
Rocklea is a southern suburb of Brisbane, located approximately 9km from the CBD. The suburb is well-known for the Brisbane Produce Markets

Tugun QLD 4224

http://www.travelmate.com.au/mapmaker/m ... &state=QLD
ImageImageImageImageImage
GRAB THE VIN FROM DONOR VEHICLES
AUSubaru member specials
Brumby EA81 Oil Pump kit (4 x 'o'rings + gasket) posted Australia wide $22!
Brumby sloppy shifter bush kit $44 posted
email me
http://www.domsmotors.com.au
NOW DISTRIBUTING FOR SUBAXTREME BASH PLATES, NUDGE AND BULLBARS

User avatar
Subyroo
Junior Member
Posts: 734
Joined: Mon Nov 14, 2005 10:00 am
Location: Sunshine Coast

Post by Subyroo » Sat Sep 26, 2009 12:13 pm

This portion of reply removed at Steptoe's request? :confused: :confused:

Ask the question on the Overlander Forum there are a few guys over there with Jeeps.
Peter

Image

User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Sun Sep 27, 2009 11:45 am

thanks. did not think this post went up as got an interupted message t and to try again, computer froze, I gave up. He has since emailed qld fair trading to get some help.

User avatar
RedNekTJ
Junior Member
Posts: 31
Joined: Thu Sep 06, 2007 5:38 pm
Location: Brisbane

Post by RedNekTJ » Sun Sep 27, 2009 5:37 pm

Ask on http://www.ausjeepoffroad.com. I think jeepengines.com are a sponsor of the site over there.

User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Post by dfoyl » Mon Sep 28, 2009 1:14 pm

I have dealt with Chrysler dealers in the USA for valve stem seals (different engine than the Jeep, but same warehousing) and it did take a while for the seals to arrive...
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.

User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Mon Sep 28, 2009 7:30 pm

done a bit more work on this. Fair trading enquiry gained nothing, but some links to search business names.


UPDATE....some good news....the whole story was looking suss. Impressive looking website, found it in minutes on google, found what we were after, only a mobile phone number available supposed it was like the old yellow page advertisinwhere they use a yellow page number only, spoke to a guy, got a faxed invoice to pay in full. The invoice was in another business name to what was used in the ads, same type of business same sort of offers, same PO box, no main landline, same sales rep mobile and name then there is no street addres in any web site advert, no main landline number, no listing in white pages electronic, no answer or reply to messages over three days of calling the mobile, street view on google of the address came up down the next street, fax number continually engaged over the weekend, and the fax had another business name print out on it . Mate was getting very worried about his money, having to chase up another head and pay for that as well...then this morning the sale rep rang to say he was chasing up the location of the head with the carrier...it has gone astray by the looks. Thanks for your input :)

Post Reply

Return to “Open Slather”