MY/Brumby sports steering wheel and boss
Needs more horn buttons on that steering wheel <g>
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.
Contact me for reproduction XT6 hubs...and EA82 rear discs.
The sport wheel is only 25mm smaller in diameter than the original but is certainly enough to be an issue.
I too will be putting the original wheel back on which is the same as the photo from Bantum.
I will be putting one of those lace on wheel covers on, had one before but have to see if they are still available somewhere.
Would like a brown one if possible.
I too will be putting the original wheel back on which is the same as the photo from Bantum.
I will be putting one of those lace on wheel covers on, had one before but have to see if they are still available somewhere.
Would like a brown one if possible.
-
Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Steering Wheel Covers ...
Haven't checked if you can still get them as last time I looked for a stitched cover, I couldn't find any & only found the slip over type - if you do see any, let us know ... 
Cheers, Bantum ...
Cheers, Bantum ...
