Wrecking FWD Leone Sedan

T.Farm.Brumby · Post by **T.Farm.Brumby** » Wed Jul 17, 2013 4:44 pm

Hi all, I'm wrecking Leonie and selling whatever I can.

Literally everything is for sale, engine, driveline, interior, all panels, the only thing missing is probably 1 or two plastic pieces of dash trim, the rear passenger door handle mech, the shroud/housing for the gear stick (perished and shattered when I tried to remove it for someone a while ago) and the odd part here or there that I took for the RX, nothing important is gone anyway.

Anyway, as long as you're happy to pay postage, I'll take any reasonable offers. I don't want much for the parts, it's already paid me back in parts and experience.

Link to the car is in my sig. I'll post more pictures on here in the next couple of days.

Cheers,
Tom.

T.Farm.Brumby · Post by **T.Farm.Brumby** » Tue Sep 24, 2013 9:55 pm

Bumpity bump!

I'm committed to stripping her now, everything is still available, I'll consider any resonable offer on any part.

Get on it!

Gannon · Post by **Gannon** » Tue Sep 24, 2013 9:59 pm

Gear stick surround plastic, the piece that goes from the radio to the handbrake?

Condition and colour?

A photo would be good

Subydoug · Post by **Subydoug** » Tue Sep 24, 2013 10:05 pm

Speedo cable if its not snapped

.

Regards

Doug

T.Farm.Brumby · Post by **T.Farm.Brumby** » Tue Sep 24, 2013 11:28 pm

Gannon wrote:Gear stick surround plastic, the piece that goes from the radio to the handbrake?

Condition and colour?

A photo would be good

I've dealt with you before I think mate, tried getting it off, perished and pieces crumbled off. Sorry :'(

Subydoug wrote:Speedo cable if its not snapped .

Regards

Doug

I'll check it out in the next few days mate when I get some time. Speedo seemed to work fine from the few little drives I had though

What sort of cost were you looking at?

Subydoug · Post by **Subydoug** » Wed Sep 25, 2013 9:06 am

Well I cant seem to find any online, and repco couldnt seem to find one. My next stop was going to be a subaru dealership. Around 60 bucks + postage and Id be over the moon

.

Regards

Doug

T.Farm.Brumby · Post by **T.Farm.Brumby** » Wed Sep 25, 2013 12:41 pm

Subydoug wrote:Well I cant seem to find any online, and repco couldnt seem to find one. My next stop was going to be a subaru dealership. Around 60 bucks + postage and Id be over the moon .

Regards

Doug

I'm happy with that

I'll let you know once its out.
Do you just need the cable or is there any brackets or mounts or ends or anything you need with it?

Cheers

Subydoug · Post by **Subydoug** » Wed Sep 25, 2013 1:50 pm

Just the cable, the outer and inner if possible, though I could get away with just the inner.

Doug

Brumbyowner · Post by **Brumbyowner** » Wed Sep 25, 2013 7:38 pm

Hi mate,
Looking for the wiper switch assembly and grey box under dash so I can put intermittent in the Brumby.

Stuart

T.Farm.Brumby wrote:Hi all, I'm wrecking Leonie and selling whatever I can.

Literally everything is for sale, engine, driveline, interior, all panels, the only thing missing is probably 1 or two plastic pieces of dash trim, the rear passenger door handle mech, the shroud/housing for the gear stick (perished and shattered when I tried to remove it for someone a while ago) and the odd part here or there that I took for the RX, nothing important is gone anyway.

Anyway, as long as you're happy to pay postage, I'll take any reasonable offers. I don't want much for the parts, it's already paid me back in parts and experience.

Link to the car is in my sig. I'll post more pictures on here in the next couple of days.

Cheers,
Tom.

T.Farm.Brumby · Post by **T.Farm.Brumby** » Sun Oct 06, 2013 4:22 pm

Brumbyowner wrote:Hi mate,
Looking for the wiper switch assembly and grey box under dash so I can put intermittent in the Brumby.

Stuart

The switch assembly and box are out!

It's basically just a potentiometer switch attached directly to a grey box with wiring, which ends in a blue plug. Anything else required? Motors etc?

In the process of removing the dash at the moment so the speedo cable will be out in due time

Cheers,
Tom.

T.Farm.Brumby · Post by **T.Farm.Brumby** » Sun Oct 06, 2013 4:26 pm

Looks like this.

Not exactly because this isn't actually the part, but this layout. All good?

T.Farm.Brumby · Post by **T.Farm.Brumby** » Wed Mar 05, 2014 12:26 pm

Bump. Who still needs anything? I've been very slack about this sorry