Ebay Auctions

Proton mouse · Post by **Proton mouse** » Mon Mar 31, 2014 11:00 pm

If you want a laugh, have a read of this Brumbys description on Ebay..

http://www.ebay.com.au/itm/Subaru-Brumb ... 3a8df3df06

ozdog · Post by **ozdog** » Tue Apr 01, 2014 10:53 am

Proton mouse wrote:If you want a laugh, have a read of this Brumbys description on Ebay..

http://www.ebay.com.au/itm/Subaru-Brumb ... 3a8df3df06

:p:p
made my day. thanks for sharing!

sublime · Post by **sublime** » Tue Apr 01, 2014 12:00 pm

1978 Brumby on eBay

http://www.ebay.com.au/itm/1978-Subaru- ... 459&_uhb=1

Nice starting price, not so nice cowl rust!

Proton mouse · Post by **Proton mouse** » Thu Apr 03, 2014 12:12 pm

ozdog wrote::p:p
made my day. thanks for sharing!

My pleasure, glad you enjoyed!!

Stumbled upon this black alloy (factory??) MY bull bar on gumtree in Brisbane.

http://www.gumtree.com.au/s-ad/bracken- ... 1041087423

Willy Fisterbottom · Post by **Willy Fisterbottom** » Tue Apr 08, 2014 6:31 am

Interestingly coloured Vortex

http://www.gumtree.com.au/s-ad/traralgo ... 1043073728

Proton mouse · Post by **Proton mouse** » Tue Apr 08, 2014 1:32 pm

Complete set of Brumby chrome trim in Victoria. Wont post but maybe courier?

http://www.ebay.com.au/itm/SUBARU-BRUMB ... 1269393814

tambox · Post by **tambox** » Wed Apr 09, 2014 6:12 pm

This looks like a bit of fun.
http://www.ebay.com.au/itm/Subaru-L-Ser ... 316wt_1362

henpecked · Post by **henpecked** » Wed Apr 09, 2014 9:12 pm

1990 targa brumby NSW

http://www.ebay.com.au/itm/Subaru-Brumb ... 990&_uhb=1

henpecked · Post by **henpecked** » Thu Apr 10, 2014 12:45 pm

http://www.ebay.com.au/itm/Lift-kit-5-t ... 461d96710d

Tweety · Post by **Tweety** » Sun Apr 13, 2014 8:20 pm

Full SPFI injection system for ea81 minus manifold. 2 days to go.

http://www.ebay.com.au/itm/221410797159 ... 1555.l2649

sublime · Post by **sublime** » Sun Apr 13, 2014 10:02 pm

Tweety wrote:Full SPFI injection system for ea81 minus manifold. 2 days to go.

http://www.ebay.com.au/itm/221410797159 ... 1555.l2649

Damn you Tweety! Why does stuff like this always come up when you can least afford it!?!?

Oh well, good luck with the sale.

Silverbullet · Post by **Silverbullet** » Sun Apr 13, 2014 10:47 pm

I'd be tempted if I hadn't already bought a weber etc...well if you still have it in 6 months I'll PM you

Willy Fisterbottom · Post by **Willy Fisterbottom** » Mon Apr 14, 2014 7:37 am

Tweety wrote:Full SPFI injection system for ea81 minus manifold. 2 days to go.

http://www.ebay.com.au/itm/221410797159 ... 1555.l2649

What manifold were you using? I am keen.

Tweety · Post by **Tweety** » Mon Apr 14, 2014 11:09 am

I'm using the sPFI manifold for my weber 38/38 project on my rebuild engine. larger carbie think best to use the largest manifold and with a port would give nice breathing.

So the SPFI unit is otherwise complete. shouldnt cost too much for a bare manifold to be shipped from the US.

The system has all wires tagged so is easy to fit for that reason. I highky suspect I had internal issues with my ea81 that led to the engine failing. Naught to do with the SPFI system. I used 2 litres of oil in around 50kms. I just havent got the patience to keep the system.

It was advertised on here some time ago ...

Willy Fisterbottom · Post by **Willy Fisterbottom** » Mon Apr 14, 2014 1:04 pm

Tweety wrote:I'm using the sPFI manifold for my weber 38/38 project on my rebuild engine. larger carbie think best to use the largest manifold and with a port would give nice breathing.

So the SPFI unit is otherwise complete. shouldnt cost too much for a bare manifold to be shipped from the US.

The system has all wires tagged so is easy to fit for that reason. I highky suspect I had internal issues with my ea81 that led to the engine failing. Naught to do with the SPFI system. I used 2 litres of oil in around 50kms. I just havent got the patience to keep the system.

It was advertised on here some time ago ...

Any chance of posting a pic of the SPFI manifold next to a carb manifold so I know what I'm up for in regards to modifications?

Cheers.

Tweety · Post by **Tweety** » Mon Apr 14, 2014 2:08 pm

The last pic is of a black bolt rHS for the temp sensor that has been plugged and a brass sensor that is my reversing alarm from a truck that sounds when my radiator coolant reaches 95 degrees C (the perils of a rear engined trike).

The SPFI manifold shown has its intake hole enlarged. from bolt to bolt (centres) 80mm and bolt centre to bolt centre direction along the manifold 70mm. hope this helps.

What is important here is sensors. They can cost a fair bit to replace. In desperation several were replaced. There are 3 throttle position sensors all good, the temp sensor was tested and is fine, the MAF was faulty and replaced. And I have a separate MAF off another car with the same part number for some experimenting if you please. The MAF part number is shared with I think a Nissan Navara (US) but isnt the same. There is a spare injector that has been swapped and works as welll as the original I had- these cost big dollars. ECU works great. Fuel pump (HP) is near new. Coil is fine and there is a spare coil mount. This mount has a spare transister on it, these can fail apparently.

Tweety · Post by **Tweety** » Mon Apr 14, 2014 2:25 pm

The original intake hole from the SPFI manifold

The spare coil mount

This is a sensor connection unit I made up to remotely measure things. that comes with the unit.

Willy Fisterbottom · Post by **Willy Fisterbottom** » Mon Apr 14, 2014 6:33 pm

Tweety wrote:The original intake hole from the SPFI manifold

The spare coil mount

This is a sensor connection unit I made up to remotely measure things. that comes with the unit.

If I can get a manifold, I'll buy it

Tweety · Post by **Tweety** » Fri Apr 18, 2014 9:41 pm

Item didnt sell.

Is automatically readvertised another two times. So about the start of May it will cease to be advertised and will gather dust until one of you young guys gets that microsoft job and wants to buy it. lol

Willy Fisterbottom · Post by **Willy Fisterbottom** » Sat Apr 19, 2014 8:30 am

When I find a manifold.

The AUSubaru.com.au Forums

Ebay Auctions

L series 5" lift kit $150