For sale: 87 L series coupe RX/II, Jap import - Damaged

Got something to sell ? Put it in here ...
User avatar
'87 RX/II coupe
Junior Member
Posts: 48
Joined: Mon Apr 16, 2007 5:14 pm

For sale: 87 L series coupe RX/II, Jap import - Damaged

Post by '87 RX/II coupe » Wed Jun 25, 2008 6:18 pm

Hey guys, up for sale is my beloved L-series coupe. It has rear damage and is a repairable write off. Vehicle was only written off due to lack of part availability. I'm selling everything L-series I have with the car including an EA82T(JAP) engine, and is broken down into parts. Also is a few boxes of misc parts such as a distributers, seatbelts etc etc etc. I want to sell the car and all the spares as one. The car is a full jap import under the 15 year rule, and has all the compliancing mods. Car has been registered in Victoria for the past 2 years. Car drives well but is just a lil short in the rear.


Features:
EA82T Jap spec
5 speed dual range
Heavy duty cluth (less than 6 months old)
Diff lock
14" alloys with heaps of tread.
2 1/4" exhaust
Frontmount cooler (installed but not connected but have the plumbing)
Nardi steering wheel
129,000 k's on clock, 20,000 of them in oz
Spare ea82t engine in parts and whatever l series stuff I can conjur up.
I'm sure these more features but just ask if need be.

Car can be viewed in Epping, Victoria from 7:30 to 4 mon-sat or other times by request.

Any queries call Brad on 0433113122

Any reasonable offers will be considered
Attachments
rear damage close 1.JPG
rear damage close 1.JPG (57 KiB) Viewed 3342 times
car rear.JPG
car rear.JPG (71.02 KiB) Viewed 3324 times
car front.JPG
car front.JPG (60.64 KiB) Viewed 3314 times
car side 2.JPG
car side 2.JPG (62.25 KiB) Viewed 3333 times
car side 1.JPG
car side 1.JPG (59.61 KiB) Viewed 3383 times

User avatar
'87 RX/II coupe
Junior Member
Posts: 48
Joined: Mon Apr 16, 2007 5:14 pm

Post by '87 RX/II coupe » Wed Jun 25, 2008 6:58 pm

here are some more pics
Attachments
nardi.JPG
nardi.JPG (64.52 KiB) Viewed 3289 times
interior.JPG
interior.JPG (72.11 KiB) Viewed 3289 times
engine bay.JPG
engine bay.JPG (94.98 KiB) Viewed 3307 times
car side close.JPG
car side close.JPG (70.64 KiB) Viewed 3289 times
rear damage close 2.JPG
rear damage close 2.JPG (54.53 KiB) Viewed 3286 times

User avatar
'87 RX/II coupe
Junior Member
Posts: 48
Joined: Mon Apr 16, 2007 5:14 pm

Post by '87 RX/II coupe » Wed Jun 25, 2008 7:00 pm

and some more
Attachments
spare motor 3.JPG
spare motor 3.JPG (70.46 KiB) Viewed 3250 times
spare motor 2.JPG
spare motor 2.JPG (83.16 KiB) Viewed 3255 times
spare motor 1.JPG
spare motor 1.JPG (85.87 KiB) Viewed 3271 times
console.JPG
console.JPG (62.24 KiB) Viewed 3275 times
cluster.JPG
cluster.JPG (63.37 KiB) Viewed 3280 times

User avatar
'87 RX/II coupe
Junior Member
Posts: 48
Joined: Mon Apr 16, 2007 5:14 pm

Post by '87 RX/II coupe » Wed Jun 25, 2008 7:02 pm

and a few more
Attachments
tag2.JPG
tag2.JPG (52.49 KiB) Viewed 3247 times
tag1.JPG
tag1.JPG (48.48 KiB) Viewed 3274 times
spare turbo and manifold.JPG
spare turbo and manifold.JPG (71.99 KiB) Viewed 3263 times

User avatar
Gannon
Senior Member
Posts: 4580
Joined: Sat Nov 05, 2005 10:00 am
Location: Bowraville, Mid Nth Coast, NSW

Post by Gannon » Wed Jun 25, 2008 7:43 pm

Damn

Somebody had better buy it, its too good a car to just let slip by
Current rides: 2016 Mitsubishi Triton GLS & 2004 Forester X
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------

User avatar
'87 RX/II coupe
Junior Member
Posts: 48
Joined: Mon Apr 16, 2007 5:14 pm

Post by '87 RX/II coupe » Wed Jun 25, 2008 7:47 pm

Thanks Suparoo, been a hard decision to make even with it in the state it's in.

User avatar
LTurbo
Junior Member
Posts: 330
Joined: Tue Oct 04, 2005 10:00 am
Location: Canberra

Post by LTurbo » Wed Jun 25, 2008 8:05 pm

any idea on the condition/Kms on the spare engine?

User avatar
'87 RX/II coupe
Junior Member
Posts: 48
Joined: Mon Apr 16, 2007 5:14 pm

Post by '87 RX/II coupe » Wed Jun 25, 2008 8:11 pm

spares done roughly 115ish, its the original outa the car. was going to do a ground up rebuild but alas not going to happen now

User avatar
r00fi
Junior Member
Posts: 74
Joined: Thu Dec 22, 2005 10:00 am
Location: Melbourne VIC

Post by r00fi » Wed Jun 25, 2008 8:15 pm

Oh no! What a waste.

Reckon I saw it parked 'round the back of Southbank about a week or so ago.
Subaru RX Turbo (engine out AGAIN!)
Ford XF Panelvan EEC-IV (rusting)
Ford Escort RS1800 GP4 (in pieces)
Van Diemen RF89 (Sold, finished and racing)
Softride Powerwing 650 (working fine)

User avatar
'87 RX/II coupe
Junior Member
Posts: 48
Joined: Mon Apr 16, 2007 5:14 pm

Post by '87 RX/II coupe » Wed Jun 25, 2008 8:19 pm

Yup that was me alright, pickin up my gf, I dunno who else it could be.... only one registered one in vic according to the wieners at vicroads. Yeah its a massive shame, but thats what happens when rain and non-concentrating drivers mix!

User avatar
chubby37
General Member
Posts: 1055
Joined: Tue Oct 04, 2005 10:00 am
Location: IN HELL!!!or known as ipswich

Post by chubby37 » Thu Jun 26, 2008 12:20 am

what you looking for as a reasonable offer...pm me if you dont want to say in open forum...thanks
ImageImage

life is like a game of cricket...at some time you will get hit in the nuts

User avatar
L-BJ
Junior Member
Posts: 60
Joined: Wed Feb 06, 2008 11:04 am
Location: Melbourne

Post by L-BJ » Thu Jun 26, 2008 5:39 pm

That's the same one in the AutoSpeed article yeah? "Grand Daddy Subie", imported by Yahoo Motorsport in (R)Adelaide? Shame to see it this way, if i could find the parts i would take it. Good Luck

User avatar
'87 RX/II coupe
Junior Member
Posts: 48
Joined: Mon Apr 16, 2007 5:14 pm

Post by '87 RX/II coupe » Thu Jun 26, 2008 8:29 pm

Yep, same one mate from John at Yahoo.

User avatar
El_Freddo
Master Member
Posts: 12515
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Thu Jun 26, 2008 10:50 pm

Damn, Thats painful - for you and me as I have no money to offer atm. I've wanted one of these cars since I first laid eyes on them.

Hope it goes to a loving new home.

Good luck with the sale, I feel your pain.

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
'87 RX/II coupe
Junior Member
Posts: 48
Joined: Mon Apr 16, 2007 5:14 pm

Post by '87 RX/II coupe » Mon Jun 30, 2008 4:02 pm

'cough cough'

User avatar
'87 RX/II coupe
Junior Member
Posts: 48
Joined: Mon Apr 16, 2007 5:14 pm

Post by '87 RX/II coupe » Tue Jul 01, 2008 10:54 am

Car will be sent to fowles auctions, check http://www.manheimfowles.com.au/ for details. should be within the next week or two. Should be able to score yourself a bargain! If anyones interested in the spare ea82t jap motor I will be starting a new thread soon.

User avatar
El_Freddo
Master Member
Posts: 12515
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Tue Jul 01, 2008 2:23 pm

'87 RX/II coupe wrote:Car will be sent to fowles auctions, check http://www.manheimfowles.com.au/ for details. should be within the next week or two. Should be able to score yourself a bargain! If anyones interested in the spare ea82t jap motor I will be starting a new thread soon.
:cry:

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
Phizinza
General Member
Posts: 1444
Joined: Mon Oct 10, 2005 10:00 am
Location: SA
Contact:

Post by Phizinza » Tue Jul 01, 2008 6:14 pm

Hope you get plenty for it. I was going to offer $1000, but I remember how much the import place wanted and I didn't think $1000 was fair.
Owned - 89 Brumby, 83 Wagon, 83 Leone 4WD Sedan, 83 Touring Wagon, 99 Outback
Own - 87 Brumby, 93 Liberty, 09 Forester
Offroading Subarus Facebook Page


User avatar
El_Freddo
Master Member
Posts: 12515
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Tue Jul 01, 2008 10:12 pm

Phizinza wrote:Hope you get plenty for it. I was going to offer $1000, but I remember how much the import place wanted and I didn't think $1000 was fair.
Yeah Phiz, I can't even muster that amount, would be quite an insult...

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
schultzie
Junior Member
Posts: 379
Joined: Tue Oct 04, 2005 10:00 am
Location: Boronia, Victoria
Contact:

Post by schultzie » Wed Jul 02, 2008 7:34 pm

omg i want the side skirts and front bar and front mount and all the bits that go with it....
L-series Ea82t, WAIC+BOV 1Bar, 15's, 5sp dr, WOLF3D V4+, =D
Image

Post Reply

Return to “For Sale”