The sale includes 1x 1991 sportswagon, originally carbied EA82 but currently installed with MPI EA82.
MPI engine bought some time ago on this forum in good faith however it has a compression issue on 1&3 (~120psi), 2&4 are good (~150psi). Could be a head gasket, dont have the energy to find out.
Engine has a brand new clutch and remachined flywheel.
Gearshift linkage has been repaired so no more sloppy lever.
Power steering fitted.
Aircon is still gassed (as far as I know) and was cold last time engine was running.
No heater core (bypassed inside dash).
Rola Roof Rack
Radiator recently repaired (re-tanked).
Sunrasias 13" x5 (Average tyres).
CD/MP3 stereo.
I also have the Haltech computer and loom which I was going to use for the MPI. Have TPS, but will need MAP.
Surge tank fitted.
EFI pump fitted.
Plumbed for first start.
HAS TURBO CROSSMEMBER FITTED - part of my master plan...
Spare parts
Original carby engine, running when removed - should have left it in there...
- Valve train removed from 1&3 but can be swapped back from MPI motor.
- Dizzy on MPI motor.
Other than that I am tempted to put it back in and re-register it.
New front bumper cover (in box).
Bullbar (bent)
Original Steering Rack (manual).
Original crossmember.
Spare MPI intake manifold complete with piping and injectors.
Probably more, as I think of it I will update the post.
Do NOT want to split really, prefer some-one to come and take the lot. If anyone wants the car only then I will sell the other stuff off separately.
It's on here for forum members to get first refusal, next month either the other engine is going in or it is going on ebay.
Any questions just PM.
EDIT: Car is in Brisbane, and I am open to offers.
Shane