Various parts for sale, get in quick!!
Posted: Thu Dec 20, 2012 1:28 pm
Alrighty, Its that time where i have to have a clean up so get in quick and get all the good bits!!
* Gen 3 outback 5 spd + diff in good condition: $300
* Gen 3 outback tailgate + garnish and tail lights (factory dark blue):
$150
*Gen 3 outback wheels + tyres (about 60% tread): $250
* 4x 14" vortex wheels with tyres (tyres not great): $220
* Good condition EJ25 with wiring loom professionally cut down to suit brumby or L series: $450
( plugs have been added into loom to suit stepper motor tacho and bee*R rev limiter, plug and play both can be had a small fee with loom.)
*Brumby gearbox x 2, both in working condition dual range + low: $80 each.
*Brand new clutch to suit brumby: $180
* Brand new headlights for earlier single headlight brumby + HID kit:
$200
* 4 stud wheel spacers x 2, space wheels out by about an inch and a half : $80 for both
*canopy to suit brumby, is very slightly different shape to brumby but still fits well and had been used by me for over a year and had no dramas: $150
* Brumby tailgate, repaired by panelbeater + resprayed all straight without lock mechanism : $250
* Brumby roll bar, white in colour could do with a bit of paint: $50
NOW come the good bits.
* LSD rear diff from rx turbo, clutch type i believe been sitting for 12 months but was perfect when parked: $300
* Rear disc brake assembly from rx turbo, has sat for 12 months as above but still all working : $200
* EA82T from rx turbo, unknown condition, have had it running in the last week and turbo seems to spool and runs smoothly: $300
* FACTORY koni adjustable shocks for L series in average condition, seem to be okay: $200
* also have straight brumby doors + front panels, bonnet, new windscreen rubber still in packaging, gen3 outback seats modified to fit in brumby.
Pm for details on any parts or anything else your chasing,
Located at Taylor's Arm, half an hour south of Coffs Harbour, NSW
OR Send me a message on 0432624018 and ill try and get back to you as soon as i can.
Cheers, Tom
* Gen 3 outback 5 spd + diff in good condition: $300
* Gen 3 outback tailgate + garnish and tail lights (factory dark blue):
$150
*Gen 3 outback wheels + tyres (about 60% tread): $250
* 4x 14" vortex wheels with tyres (tyres not great): $220
* Good condition EJ25 with wiring loom professionally cut down to suit brumby or L series: $450
( plugs have been added into loom to suit stepper motor tacho and bee*R rev limiter, plug and play both can be had a small fee with loom.)
*Brumby gearbox x 2, both in working condition dual range + low: $80 each.
*Brand new clutch to suit brumby: $180
* Brand new headlights for earlier single headlight brumby + HID kit:
$200
* 4 stud wheel spacers x 2, space wheels out by about an inch and a half : $80 for both
*canopy to suit brumby, is very slightly different shape to brumby but still fits well and had been used by me for over a year and had no dramas: $150
* Brumby tailgate, repaired by panelbeater + resprayed all straight without lock mechanism : $250
* Brumby roll bar, white in colour could do with a bit of paint: $50
NOW come the good bits.
* LSD rear diff from rx turbo, clutch type i believe been sitting for 12 months but was perfect when parked: $300
* Rear disc brake assembly from rx turbo, has sat for 12 months as above but still all working : $200
* EA82T from rx turbo, unknown condition, have had it running in the last week and turbo seems to spool and runs smoothly: $300
* FACTORY koni adjustable shocks for L series in average condition, seem to be okay: $200
* also have straight brumby doors + front panels, bonnet, new windscreen rubber still in packaging, gen3 outback seats modified to fit in brumby.
Pm for details on any parts or anything else your chasing,
Located at Taylor's Arm, half an hour south of Coffs Harbour, NSW
OR Send me a message on 0432624018 and ill try and get back to you as soon as i can.
Cheers, Tom
