Page 1 of 2

Everything I have for sale

Posted: Tue May 07, 2013 10:28 pm
by niterida
Looking to offload everything I have bought over the last few years :

V6 STi S201 5 speed box - 4.44 front LSD, ultra low gearset, DCCD centre diff with manual controller and wiring and thumbwheel. Will also throw in my untested homemade auto controller that adjusts dccd lockup according to throttle position. $1500.

4.44 rear 1.5 way plated LSD - $500 NO LONGER FOR SALE

ISC coilovers - adjuster stuck on softest setting - $400 NO LONGER FOR SALE

King Springs coilovers - height adjustable only - $400

2 sets of STi 4 pot front/2 pot rear calipers - $500 ea set 1 SET SOLD - 1 SET NO LONGER FOR SALE

1 dogbone adapter for rear 2 pots - $200 SOLD

One set of discs to match above calipers -excellent condition - $200 NO LONGER FOR SALE

ECU for RS with tune for VF23, FMIC and 380's also has high/low tune switch for when the missus drives - $200 NO LONGER FOR SALE

Standard 2 1/4" WRX stainless steel exhaust - turbo back - $100

GC wagon tailgate spoiler - $40
2007 on WRX hatch tailgate spoiler - $40

6 x STi con rods - $20 each NO LONGER FOR SALE

One set of rear discs and one set of DBA 5000 2 piece front rotors to match above calipers - excellent condition - $500 SOLD

Stainless steel slip fit extractors - $200 NO LONGER FOR SALE

3" stainless catless turbo back exhaust - inc 3" extension for wagons and muffler - BRAND NEW $400 NO LONGER FOR SALE

3" Titanium dump pipe back exhaust - whole thing weighs 3kg including muffler - needs hanger welded on properly (could be expensive finding a titanium wqelder) - this would cost about $1500 new - LOOKING FOR BEST OFFER

KOYO alloy radiator for WRX - excellent condition - 50mm thick - $300

Set of 5 (yes 5) 18" 3 piece WEDS mesh style wheels - currently having curb rash repaired so not available for a few weeks. Centres are polished alloy but can be painted. These are worth nealry $5000 new - $1500.

Set of 4 18" 3 piece ROH Strada rims. Currently centres are in shadow chrome (which is paint over powder coat). Most of them have chips out of the powder coating. I started to strip one with paint stripper which works but is a slow process. This one a t least will need to be professionally stripped or sand blasted unless you are prepared to spend the time. Worth $3200 new - $1000 NO LONGER FOR SALE

Set of 4 16" BBS forged STi rims - super light weight - genuine OEM Subaru - $500 SOLD

Set of 4 15" mesh style rims - $100 SOLD

Set of 3 18" APEC 5 spoke wheels - similar to the ROH Strada - $120. NO LONGER FOR SALE

All rims are 5x100 and +55 or thereabouts

Carbon fibre spoiler - sort of like the old Falcon GTHO style - genuine carbon fibre - $120

Carbon Fibre STi strut brace - been modified at the strut mounts to fit a Brumby - will still fit RS/WRX - $140 NO LONGER FOR SALE

Whiteline rear strut brace - painted black and red (by previous owner) and needs redone - $100

Front mount Intercooler - brand new 600X300X85 - not sure what it will fit as it was for my mutant Brumby - $100

Front mount intercooler - f'ing huge and ugly - again not sure what it fits - $50

selection of 24/22/20mm front and rear swaybars - $100 each SOLD

selection of car stereo gear :
4 x 80w RMS Blaupunkt amp - $80
1000wJaycar monoblock class D amp - $150
4 x 80w Power Acoustik amp - one input level switch is stuck -$50
2 x 250W max Sony Xplod amps - $50 each
4 x 6" Jaycar Response Kevlar component speakers - inc crossover and tweeters - $100 each set
2 x JL Audio 6.5" component speakers - including crossover and tweeters - $100
2 x Hertz HSK165 6.5" replica (but still as good as the real thing) component speakers inc crossover and tweeters - $100
2x USD Audio (High end $1000 speakers from a few years back) 6.5" component speakers - $200
JVC AVX44 head unit - built in bluetooth, DVD player 3.5"screen, touch screen controls so no buttons and unit can go completely black to match the dash - awesome unit - $200

2 x MOMO steering wheels - excellent condition - genuine MOMO - $200 each
1 x MOMO wheel - not leather so I figure its not genuine although it does look good - $120
1 x SAAS white leather steering wheel - like brand new -$120

1 x DCCD controller - no wiring - $20 SOLD

Gen 2 Liberty NA dash and HVAC etc - $50 for the whole lot.

Gen 2 Liberty EJ22, 3.7 gear box and diff. Suspected blown head gasket. $300 NO LONGER FOR SALE

1 x set Monza fixed back ADR approved buckets - blackwith red trim - BRAND NEW - $300 NO LONGER FOR SALE
1 x set no-name fixed back buckets - not ADR'd - most comfortable I have sat in as new - $150 NO LONGER FOR SALE

1 x set Monza recling seats with fibreglass back - ADR'd - good condition but some padding on lower bolsters has collapsed. Material had faded and has been sprayed with material dye paint. Black/dark grey, - $300

2007 WRX gear shifter - including lower linkages but no knob - $50
WRX short shifter - $40
Alloy poolball shaped/sized gear knob - $50

2 full sets of braided brake lines - both ADR'd - excellent condition - $100 each set of 4. SOLD

TD05 - in bits but includes a brand new rebuild kit with a brand new 20G wheel. Housing will need to be machined to suit the 20G or keep the original 16G wheel which is in excellent condition. Has 90deg inlet bend for RS - $200 NO LONGER FOR SALE

SX Performance fuel pump - rated for 1000hp or something stupid - this is a big mutha and sells for about $800 - $300
Holley Red fuel pump - can be used as a lift pump - $50

Alloy lower control arms - from a GD but will fit RS - $200

And lastly the RS wagon - completely standard Dark Grey genuine RS wagon - $3500.
Currently sitting on stands with no running gear - will put all the standard bits back on or can fit any (or all) of the above bits for extra. Car is currently registered in WA.

Open to offers on anything listed. Will update with more as I find bits. Can email or SMS photos.
Items located in Geraldton - can post via Auspost or will do one trip to Perth and deliver to Perth or freight depot if I sell enough gear to make it worthwhile.

Cheers - Ken 0439 949 633

Oh and a rusty LX Torana hatch if any one is brave - $2500

Posted: Tue May 07, 2013 11:28 pm
by guyph_01
can you txt me pics of the gc gd spoilers?

Posted: Tue May 07, 2013 11:31 pm
by LIFTED
Wow that's a lot of stuff Ken!

Posted: Tue May 07, 2013 11:39 pm
by LIFTED
Wow that's a lot of stuff Ken!
What year is the 2 1/4" WRX stainless steel exhaust for, just wondered if it would bolt straight on to a 99 GT Forester
Also after a 20mm rear sway bar to suit same 99 Forester

Posted: Wed May 08, 2013 7:01 am
by niterida
LIFTED wrote:Wow that's a lot of stuff Ken!
What year is the 2 1/4" WRX stainless steel exhaust for, just wondered if it would bolt straight on to a 99 GT Forester
Also after a 20mm rear sway bar to suit same 99 Forester
Its for a GC so should fit the Forester afaik.
WIll have a look at my bars and see ifI have a 20mm rear - I know one of my 24mm ones is for a Forester :)

Guy - will get pics of spoilers tonight when I get home form work.

Posted: Wed May 08, 2013 9:31 am
by RSR 555
Does this mean you're moving?

Posted: Wed May 08, 2013 10:06 am
by niterida
RSR 555 wrote:Does this mean you're moving?
No

Posted: Wed May 08, 2013 10:21 am
by steptoe
growing up?

Posted: Wed May 08, 2013 10:22 am
by akpv
Hi Ken,

Sent you an SMS last night re brake lines, did you receive?

Cheers,

Alex

Posted: Wed May 08, 2013 11:23 am
by niterida
steptoe wrote:growing up?
Nah I'm too old to do that :)
akpv wrote:Hi Ken,

Sent you an SMS last night re brake lines, did you receive?

Cheers,

Alex
Yeah mate - will get back to you tonight.

Posted: Wed May 08, 2013 12:05 pm
by Subydoug
Bloody hell Ken, thats quite the list! got a piccy of the Torana (dare I say it!)?

Doug

Posted: Wed May 08, 2013 12:29 pm
by niterida
Subydoug wrote:Bloody hell Ken, thats quite the list! got a piccy of the Torana (dare I say it!)?

Doug
hehehehe sure is quite a list - I added up all the asking prices and it came to $20K !!

Will take $15k for everything :)

Torana looks good in this photo :

Image

Not so good in this one :

Image

Posted: Wed May 08, 2013 3:38 pm
by jayrod
1 x set no-name fixed back buckets - not ADR'd - most comfortable I have sat in as new - $150

What do these look like?
Did they come out of the RS?

Posted: Wed May 08, 2013 4:02 pm
by niterida
jayrod wrote:1 x set no-name fixed back buckets - not ADR'd - most comfortable I have sat in as new - $150

What do these look like?
Did they come out of the RS?
Never had them fitted - they were actually supposed to be for my PS3 gaming seats :)

Look a lot like these except black : http://www.ebay.com.au/itm/BLUE-SPORTS- ... 183wt_1162

Posted: Wed May 08, 2013 6:05 pm
by Silverbullet
Wow, looks like some real bargains in there. Pity none of it would really fit my wagon resto, cept' maybe some of the speakers :rolleyes:

Posted: Wed May 08, 2013 6:35 pm
by niterida
Silverbullet wrote:Wow, looks like some real bargains in there. Pity none of it would really fit my wagon resto, cept' maybe some of the speakers :rolleyes:
Easy fixed - buy a Liberty wagon and then it will all fit :)

Posted: Wed May 08, 2013 7:12 pm
by Jeff
Is the DCCD controller , no wiring ,factory? if so i am keen as a spare . Also the braided brake lines , do they suit GC8?

Posted: Wed May 08, 2013 7:42 pm
by niterida
Jeff wrote:Is the DCCD controller , no wiring ,factory? if so i am keen as a spare . Also the braided brake lines , do they suit GC8?
Yes and Yes

Posted: Wed May 08, 2013 9:32 pm
by Green_eyed_liberty
Set of 5 (yes 5) 18" 3 piece WEDS mesh style wheels - currently having curb rash repaired so not available for a few weeks. Centres are polished alloy but can be painted. These are worth nearly $5000 new - $1500.
pictures of these please

Posted: Wed May 08, 2013 9:46 pm
by Cliff R
Sorry, there is noting there for me but I go excited at the mention of the LX Torana