Page 1 of 1

Brumby Fenders / Front Valance / Tailgate Skins

Posted: Wed Sep 04, 2013 8:46 am
by 1111giles
Howdy Folks ;)
Following months and months and Fr£%%ing months of difficult, awkward and somtimes seeming impossible negotiations :p - I can finally announce that there is now an official importer into Australia for the GRP pattern parts I produce.
Fender / wings
Front lower valance / skirt
Tailgate outer skins.
Shortly there is to be a shipment heading to Australia from England of somthing very interesting and with this can come almost any quantity of my parts:p
So here is your chance guys & gals ...........
Mr Paul Raynor aka RSR555 is your man ;)
Please state your expressions of interest below and Paul will be intouch with prices landed in Ozland.

Image
Image
Image
Image

Posted: Wed Sep 04, 2013 9:29 am
by niterida
1111giles wrote:Howdy Folks ;)
Following months and months and Fr£%%ing months of difficult, awkward and somtimes seeming impossible negotiations :p - I can finally announce that there is now an official importer into Australia for the GRP pattern parts I produce.
Mr Paul Raynor aka RSR555 is your man ;)
I've heard that Paul guy can be hard to work with ..........
I'd be down for a tailgate skin if I didn't have to buy it through him :p

Hang on I better be nice - he has a heap of parts for me at his place already !!

Well done Paul - another good service to the AUSUBARU community :cool:

Posted: Thu Sep 05, 2013 6:23 pm
by 1111giles
niterida wrote:I've heard that Paul guy can be hard to work with ..........
I'd be down for a tailgate skin if I didn't have to buy it through him :p

Hang on I better be nice - he has a heap of parts for me at his place already !!

Well done Paul - another good service to the AUSUBARU community :cool:
Paul will have prices by the weekend - please can you pm him directly so he is aware of your interest.;)

Posted: Thu Sep 05, 2013 6:38 pm
by Silverbullet
Thankyou Paul! and thankyou Giles! I'm in for a pair of fenders, I guess I'll shoot Paul a PM then. Those tailgate skins look fantastic too! I don't think I've seen a picture of them before.

Posted: Thu Sep 05, 2013 7:04 pm
by steptoe
Tailgate skins have a flaw - no dings or rust bubbles. I could probably get Giles a rust bubble casting for his next gen :p

Posted: Mon Sep 09, 2013 9:52 pm
by 1111giles
steptoe wrote:Tailgate skins have a flaw - no dings or rust bubbles. I could probably get Giles a rust bubble casting for his next gen :p
This can be arranged very easily from this end - dont forget the UK holds the world patent on iron oxide, the dings and dents - how many and how deep would sir like ?:D

Posted: Wed Sep 18, 2013 6:50 pm
by ozbrumby
interested in a tailgate skin but zero response from PM and or this thread

Posted: Mon Sep 23, 2013 10:13 pm
by RSR 555
Thanks... I think :?


Can I firstly say sorry to those that have PM'd me on these parts. I'd like to say one thing... PLEASE do not PM me but please send me an email to wrc22b at gmail dot com as I'm not always on here but I'm checking my emails most days.

As for prices, it's going to be tough at this stage, as I'm not sure how much room they are going to take up in the container. I'll try and work it out this week and let you all know.

Many thanks,
Paul