Wrecking Series 2 brumby

Proton mouse · Post by **Proton mouse** » Wed Mar 19, 2014 12:17 pm

I do but I don't know how to get it out undamaged can anyone help me here?

I got a set out perfectly from a wreckers car recently. I just kept manipulating the rubber away from the trim, with a small screwdriver and knife blade,
all the while squirting WD40 between the 2 and under the trim from either ends. It took a while but bit by bit it lifted and then slid right out.
The 2 sides next to he pillar just slid right out after spraying under the trim from the top, even though the rubber was semi hard.
Cheers, John

sublime · Post by **sublime** » Wed Mar 19, 2014 1:51 pm

If you are not saving the windscreen rubber I would imagine you could just cut away the rubber lip on one side with a Stanley knife. I suppose it is a bit fiddly!

suba2 · Post by **suba2** » Wed Mar 19, 2014 3:25 pm

Ok I'll see how I go getting it out how much is the trim worth to you?

sublime · Post by **sublime** » Wed Mar 19, 2014 6:42 pm

Hmmm... Would $40 be fair? Not really sure what the trim would be worth.

chinski · Post by **chinski** » Wed Mar 19, 2014 9:31 pm

hi mate, i'm after just one small piece haha !

in the pic of your white one the black trim piece behind the rear wheel is missing, well i'm missing the same piece of the left side of my brumby.

if yours has that bit i'll buy it from ypu if you're keen to post it to qld, i'll send you enough beer tokens ( AUD ) for 12 beers or so + plus postage ?

heres a pic of what i'm missing to be clear :

suba2 · Post by **suba2** » Thu Mar 20, 2014 7:37 pm

G'day Mate,
I'm sure I have that part will have a look on the weekend what you're willing to pay is fair
Thanks Greg

suba2 · Post by **suba2** » Thu Mar 20, 2014 7:39 pm

sublime wrote:Hmmm... Would $40 be fair? Not really sure what the trim would be worth.

I'll be getting it out on the weekend $40+$10 post
Thanks Greg

chinski · Post by **chinski** » Thu Mar 20, 2014 8:44 pm

suba2 wrote:G'day Mate,
I'm sure I have that part will have a look on the weekend what you're willing to pay is fair
Thanks Greg

cool thanks mate

Brumby_ProjectX · Post by **Brumby_ProjectX** » Thu Mar 20, 2014 9:04 pm

Howdie, how much are you after for the 2" lift kit plus post to SA?

sublime · Post by **sublime** » Thu Mar 20, 2014 10:31 pm

suba2 wrote:I'll be getting it out on the weekend $40+$10 post
Thanks Greg

Thanks Greg. Let me know how you go and I will PM my address.

Scoobie Doobie · Post by **Scoobie Doobie** » Fri Mar 21, 2014 8:06 pm

hi greg

I'm chasing a couple of parts, the solid fuel delivery line that runs thru the cab along the passenger side (largest dia of the three that a there), the two metal bars that run vertically across the rear window, and both passenger and driver's side door cards. I'm located in Adelaide so let me know what you're chasing including freight

cheers

Adam

Pogman · Post by **Pogman** » Sat Mar 22, 2014 4:19 pm

Interested in a 4 speed gearbox, PM sent.

Brumby_ProjectX · Post by **Brumby_ProjectX** » Sat Mar 22, 2014 7:51 pm

Hi, tried to pm about the 2" lift kit, inbox is full....

suba2 · Post by **suba2** » Sun Mar 23, 2014 10:06 am

Sorry mate lift kit is sold

suba2 · Post by **suba2** » Sun Mar 23, 2014 10:10 am

Mate the 3 lines look all the same size to me I don't know which 1 you're taking bout

suba2 · Post by **suba2** » Sun Mar 23, 2014 10:12 am

Scoobie Doobie wrote:hi greg

I'm chasing a couple of parts, the solid fuel delivery line that runs thru the cab along the passenger side (largest dia of the three that a there), the two metal bars that run vertically across the rear window, and both passenger and driver's side door cards. I'm located in Adelaide so let me know what you're chasing including freight

cheers

Adam

Mate the 3 lines all look the same to me I don't know which 1 you're talking bout

Scoobie Doobie · Post by **Scoobie Doobie** » Mon Mar 24, 2014 7:23 am

suba2 wrote:Mate the 3 lines all look the same to me I don't know which 1 you're talking bout

Hey mate, should have pointed it out better, it's the middle one of the three large dia ones, second from the bottom

Cheers

Adam

suba2 · Post by **suba2** » Thu Mar 27, 2014 9:52 am

G'day Mate $120 posted for the parts
Thanks Greg

Scoobie Doobie · Post by **Scoobie Doobie** » Sat Mar 29, 2014 9:59 pm

suba2 wrote:G'day Mate $120 posted for the parts
Thanks Greg

Sounds great PM sent

Cheers

Adam