Page 1 of 2

Wrecking Series 2 brumby

Posted: Tue Mar 11, 2014 7:47 pm
by suba2
Wrecking a 88 Brumby complete is full of rust sonly only good for part also got most Body Panels Rust Freefrom a few other subies I have stripped over the Years All parts available some mutiple
White Brumby is for sale
Grey Brumby is bieng stripped for parts

Posted: Wed Mar 12, 2014 1:30 pm
by suba2
Updated 12/3/2014
I have just had a squiz around my Garage
I have the following
3 x bonnets 2 silver 1 cream all very good condition 2 rust free 1 silver bonnet has very light surface rust just needs a rub back and good to go
1 x Drivers side silver gaurd very good conditon
1 x passsenger side gaurd very good condition no rust
1 x Drivers side cream door excellent condition no rust or dents
1 x cream tailgate rust free very good condition
1 x driver's side grey door small amount of rust lower near bottom hing and small damage
rear bottom where close's to tray
1 x passengers side door grey very small amount of rust been hit or sideswiped not by me i bought this ute for the targa top
1 x targa top still in vechile grey in colour dosn't leak got small chunk out of rubber on passengers side also small amount of rust near passneger top fron window all trim u need included with it very clean can be cut out wherver you desire as still in brumby
1 x motor runs good
2 x gearboxes 4 speed with hi low 4wd
2 x complete set of chrome trim
2 x set of tailights
1 set of 6 14 inch sunraiser rims
1 set of 6 13 inch sunraiser rims been powdercoated with anti rust paint grey in colour with 6 center caps
1 set of quad headlights and trim and grill
full set of ac all componets still in car and power steering
1 x fullwrap around Aluminum bullbar
1 x Challenge Canopy and 1x brand new never used tannue cover and middle bar
1 x 2 inch lift kit
1 x rollbar
I have lots more just ask as I ma have what you are after I'm a fan of the Brumbys not a Wrecker was going to do a wrx conversion with the targa but now am far to busy with work

Posted: Wed Mar 12, 2014 2:05 pm
by RSR 555
I'd be interested in the tailgate. How much? and would you be willing to package it up for freighting to WA?

Posted: Wed Mar 12, 2014 3:13 pm
by Willy Fisterbottom
I'm interested in the engine for one of my series 1 1600 coupes and also the Sunraysia's.
price please mate.

Posted: Wed Mar 12, 2014 3:18 pm
by suba2
G'day Mate,
I was just down snapping some pics and seen it's actually cream not white I will update this
in my I'd be more than happy to to pack for W.A if memory serves me corect you bought my other tailgate off me a few years back
price $400 plus frieght
thank's Greg

Posted: Wed Mar 12, 2014 4:17 pm
by suba2
Willy Fisterbottom wrote:I'm interested in the engine for one of my series 1 1600 coupes and also the Sunraysia's.
price please mate.
G'day Mte the enine is $400 can leave in the Brumby s you can hear see it running before you buy also the engine does not come with starter moter altenator and the rest of the bolt on the sunnies $250 a set
thank's Greg

Posted: Wed Mar 12, 2014 8:28 pm
by ktmtragic
Mate how much for full set of ac all componets still in car and power steering and drivers door?
Thanks

Posted: Wed Mar 12, 2014 9:25 pm
by chriso05
How much for the bullbar mate? Any pics?

Posted: Thu Mar 13, 2014 6:20 am
by suba2
ktmtragic wrote:Mate how much for full set of ac all componets still in car and power steering and drivers door?
Thanks
G'day Mate $450
Thanks Greg

Posted: Thu Mar 13, 2014 6:23 am
by suba2
ktmtragic wrote:Mate how much for full set of ac all componets still in car and power steering and drivers door?
Thanks
G'day Mate sorry that I should have been $350
Thanks Greg

Posted: Thu Mar 13, 2014 9:55 pm
by chriso05
Greg, how much for the bullbar? Where abouts is Glenfield? Cheers Chriso

Posted: Fri Mar 14, 2014 10:36 am
by suba2
chriso05 wrote:Greg, how much for the bullbar? Where abouts is Glenfield? Cheers Chriso
Hi Chriso ,
sorry bout taking couple days to get back to you the bar is $400 Glenfield is halfway between Campbelltown and Liverpool
Bar is in very good condition will come up a treat with some polish I bought this bar and never fitted it to my brumby:cool:
thank's Greg

Posted: Fri Mar 14, 2014 2:38 pm
by chriso05
Could you please take a photo of it??

Posted: Fri Mar 14, 2014 3:11 pm
by suba2
chriso05 wrote:Could you please take a photo of it??
Dude I posted a reply with 2 attacments here it is again open the attacments to see the bar:rolleyes:

Posted: Tue Mar 18, 2014 11:07 am
by Rinktas85
What price do you have on the Brumby Ute - tonneau cover, as I need to replace mine soon ... also how does the cover attach along the sides, would be handy

Posted: Tue Mar 18, 2014 11:17 am
by Willy Fisterbottom
suba2 wrote:G'day Mte the enine is $400 can leave in the Brumby s you can hear see it running before you buy also the engine does not come with starter moter altenator and the rest of the bolt on the sunnies $250 a set
thank's Greg
Does it come with Carby, heads and flywheel etc?

Posted: Tue Mar 18, 2014 6:31 pm
by suba2
Willy Fisterbottom wrote:Does it come with Carby, heads and flywheel etc?
Hi of course it does mate!

Posted: Tue Mar 18, 2014 6:37 pm
by suba2
Willy Fisterbottom wrote:Does it come with Carby, heads and flywheel etc?
Rinktas85 wrote:What price do you have on the Brumby Ute - tonneau cover, as I need to replace mine soon ... also how does the cover attach along the sides, would be handy
Hi Mate tonnaeu is brand new never been used it attaches to the side where the elastic sides pull over rubber button thing's genuine which I will supply also the front clips onto metal strip which goes onto the bars on the outside of the back window let me know if u need pics
$300 thanks Greg

Posted: Tue Mar 18, 2014 7:10 pm
by sublime
Do you have any windscreen chrome trim you would sell?

Posted: Tue Mar 18, 2014 7:17 pm
by suba2
I do but I don't know how to get it out undamaged can anyone help me here?